HP OneView for VMware vCenter/Operations Manager/Log Insight manual

Figure 40 Clone Virtual Machine – Specify New Names window

5.Enter the following information:

•New VM Names: Enter the base name for the new VMs. The # symbol is required and represents the numeric sequence for the new names. In the generated VM names, the # symbol is replaced with a number.

The default values are as follows:

Number	Default start value for numeric sequence
1–9	1
10–99	01
100–999	001

The Generated Names box shows the names of the VMs that will be created.

•New Datastore Names: Enter the base name for the new datastores. The # symbol is required and represents the numeric sequence for the new names. In the generated datastore names, the # symbol is replaced with a number.

The Generated Names box shows the names of the datastores that will be created.

•Where # is numeric and starts at: For both the VM and datastore names, enter the start value for the numeric naming sequence. The default value is 1.

6.Click Next.

The Clone Virtual Machine – Review and Validate window opens. See Figure 41 (page 66).

Cloning a VM 65