HP Medical Archive Solution manual Notification Table Headings, Heading Description

HPMA User Guide

You can configure five fields within the Notification table (indicated with the icon in the following table):

Table 59: Notification Table Headings

Heading	Description
Severity	The icon and text indicating the level of the
	alarm (see “Alarm Levels and Indicators” on
	page 28).
Id	A unique number (within the entire grid) allo-
	cated to the alarm, level, and service/
	component.
Active	A check box to enable or disable the attribute
	alarm monitoring for the particular level.
Attribute Code	The system code for the attribute being moni-
	tored. This code is used to lookup alarms in the
	chapter “Troubleshooting Alarms” on page 171.
CId	A sequence number to identify alarm sources
	that are listed as rows in a table (such as VMFR
	in the SSM X Volumes component). The
	number indicates the table row, counting from
	the top.
Primary	Describes the function of the attribute being
Message	monitored.
Secondary	Details the reason for the alarm (connection
Message	lost, storage space below 10%, and so on)
Op	A pull-down menu of operators. Select the one
	for testing the current attribute value against
	the Value threshold:
	• EQ—equals (=)
	• GE—greater than or equal to (>=)
	• LE—less than or equal to (<=)
	• NE—not equal to (!=)
	When the operation “attrval Op Value” evalu-
	ates “true”, the alarm is set to that level. See
	Figure 15: “Alarm Monitoring Algorithm” on
	page 27 for more details.

154

HP Medical Archive