HPMA User Guide
Log in
Once you have accessed the NMS via your browser, the HP Medical
Archive log in... window appears.
Figure 1: NMS log in Window
To log into the NMS:
1.Click in the username field to place the cursor in the field.
2.Type your username (case sensitive).
3.Press <Tab> to move the cursor to the password field.
4.Type your password (case sensitive). Keystrokes appear as aster- isks (*) to protect your password.
5.Click the GO 
button to access the NMS interface.
Your grid map appears. See the next chapter for information on using the interface.
If the username or password you entered could not be validated, the window shows an appropriate message in red (such as “Invalid user name. Please enter a valid user name and password.”) below the
password field. Repeat the login process to correct your entry.
If you have forgotten your password, contact HP technical support to have your password reset.
Log Out
When you have finished your NMS session, be sure to log out to keep
the system secure. The Logout arrow 
button is located under the System Status icon at the top right corner of the screen.
6
HP Medical Archive