HP Medical Archive Solution manual CMN Configuration, CLB X Dicom Component Configuration Settings

Configuration

DICOM

DICOM is optional This component provides a check box to reset the DICOM event

on the HPMA. counters. This can be used to clear alarm conditions.

Table 61: CLB X DICOM Component Configuration Settings

Prompt	Type	Description
Reset DICOM	Check box	When selected and applied, all counter attributes of
Counts		the CLB DICOM incoming and outgoing associations
		are reset to zero.

HTTP

This component provides a check box to reset the HTTP event counters. This can be used to clear alarm conditions.

Table 62: CLB X DICOM Component Configuration Settings

Prompt	Type	Description
Reset HTTP	Check box	When selected and applied, all counter attributes of
Counts		the CLB HTTP sessions are reset to zero.

Connectivity

There are no configurable settings offered for this component.

CMN Configuration

The CMN Configuration X Main page offers the standard service settings to change the labeling of the service and add notations, see Table 60 on page 158.

The Configuration Management Node (CMN) service is used to make config- uration settings on a system-wide basis, for protocol handling and network permissions. Access to the settings for components of this service is restricted to the Vendor account. Details are not included in this guide.

161

HP Medical Archive