HP 3000, 3800 manual Media does not feed automatically Cause Solution

Page 164

Printer pulls from an incorrect tray

Cause

Solution

 

 

The media size is not configured correctly for the tray.

Print a configuration page or use the control panel to determine

 

the size for which the tray is configured.

 

 

The USE REQUESTED TRAY setting on the printer control

Load media in the requested tray.

panel is set to EXCLUSIVELY, and the requested tray is

or

empty. The printer will not use another tray.

 

Change the setting from EXCLUSIVELY to FIRST on the

 

CONFIGURE DEVICE menu. The printer can use the media

 

in other trays if none is loaded in the specified tray.

 

 

Media does not feed automatically

 

 

 

Cause

Solution

 

 

Manual feed is selected in the software program.

Load tray 1, or, if the tray is loaded, press .

 

 

The correct size of media is not loaded.

Load the correct size.

 

 

The tray is empty.

Load media into the tray.

Media from a previous jam has not been completely removed. Open the printer and remove any media that is in the paper path. Closely inspect the fuser area for jams. See Jams.

The media size is not configured correctly for the tray.

Print a configuration page or use the control panel to determine

 

the size for which the tray is configured.

 

 

The guides in the tray are not against the media stack.

Verify that the guides are touching the stack.

 

 

The manual-feed prompt is set to ALWAYS. The printer

Open the tray, reload the media, and then close the tray.

always prompts for manual feed, even if the tray is loaded.

Or, change the manual-feed prompt setting to UNLESS

 

 

LOADED so that the printer prompts for manual feed only

 

when the tray is empty.

The USE REQUESTED TRAY setting on the printer control panel is set to EXCLUSIVELY, and the requested tray is empty. The printer will not use another tray.

Load the requested tray.

or

Change the setting from EXCLUSIVELY to FIRST on the CONFIGURE DEVICE menu. The printer can use other trays if no media is loaded in the specified tray.

Media does not feed from trays 2 and 3

Cause

Solution

 

 

Manual feed or tray 1 is selected in the software program.

Load tray 1, or, if the tray is loaded, press .

 

 

The correct size of media is not loaded.

Load the correct size.

 

 

The tray is empty.

Load the tray.

 

 

The correct media type for the tray is not selected on the printer

At the printer control panel, select the correct type for the tray.

control panel.

 

 

 

Media from a previous jam has not been completely removed.

Open the printer and remove any media that is in the paper

 

path. Closely inspect the fuser area for jams. See Jams.

 

 

150 Chapter 8 Problem solving

ENWW

Page 163 Page 165
Image 164
Page 163 Page 165
Contents User Guide Page HP Color LaserJet 3000, 3600, and 3800 Series printers Copyright and License Trademark CreditsOnline Services HP Customer CareHP support and information for Macintosh computers Table of contents Configuration Printing tasksPaper to avoid Paper that can damage the printer Color MaintenanceManaging the printer Appendix B Service and support Problem solvingAppendix a Supplies and accessories Appendix E Working with memory Appendix C Printer specificationsAppendix D Regulatory information 205 207Xii Printer basics Quick access to printer information Guide DescriptionPrinters at a glance HP Color LaserJet 3000 Series printerHP Color LaserJet 3000 printer HP Color LaserJet 3000n Printer 3000dn printer 3000dtn printerHP Color LaserJet 3600 Series printer HP Color LaserJet 3800 Series printerHP Color LaserJet 3800 printer HP Color LaserJet 3800n Printer 3800dn printer 3800dtn printerPrinter Features at a glanceFeature Accessibility SuppliesWalkaround 1Front view shown with optional 500-sheet paper feeder2Back and side view Operating system PCL 5c PCL 6 PS 3 emulation Printer softwareHP Color LaserJet 3600 Series printer drivers Additional drivers Operating System To change the settings for all Opening the printer driversSoftware for networks To change the productHP Web Jetadmin UtilitiesLinux HP Easy Printer Care SoftwareWindows FeaturesOther components and utilities Print-media specifications Type Dimensions Weight or thickness CapacitySupported media types HP Color LaserJet 3600 and 3800 75 toMedia size Dimensions Weight and thickness Supported media sizesEnww Control panel Control-panel overview 1Control panel buttons and lightsDisplay Control-panel indicator lightsIndicator Off Flashing Enww Using the control-panel menus To use the menusUser Name ALL Private Jobs JOB Name Retrieve Job menuMenu item Value Description Information menu Paper Handling menu Configure Device menu Printing sub-menuSymbol SET PCL Form Length OrientationFont Source Font NumberPrint Quality sub-menu System Setup sub-menu Sleep Delay Minute Tray Behavior USE Requested TrayManually Feed PromptJAM Recovery Auto Optimum SPEED/ENERGY Faster FirstUsage Save Energy Display BrightnessResets sub-menu Sub-menuSleep Mode OFF Restore FactorySettings Diagnostics menu Tray Behavior menu options Changing printer control-panel configuration settingsTo set the Use Requested Tray feature To set the Manually Feed Prompt feature To set the PS Defer Media featureTo set the Use Another Tray feature To set the Size/Type Prompt featureTo set the Sleep Delay feature Sleep Delay and Sleep Mode featuresTo set the Duplex Blank Pages feature Display Brightness feature Personality featureTo disable or enable the Sleep Mode feature To set the Display Brightness featureClearable Warnings feature Auto Continue featureTo set the Clearable Warnings feature To set the Auto Continue featureReplace Supplies feature Jam Recovery featureTo set the Replace Supplies feature To set the Jam Recovery featureLanguage feature To select a languageUsing the printer control panel in shared environments Enww O configuration USB configuration Connecting the USB cableSetting the subnet mask Network configurationSetting an IP address Setting the default gateway Disabling network protocols optionalTo disable DLC/LLC To disable IPX/SPXTo disable AppleTalk Enhanced I/O EIO configuration HP Jetdirect EIO print serversPrinting tasks Priority for print settings Controlling print jobsSource Type and SizeGaining access to printer driver settings SettingsPaper that can damage the printer Selecting print mediaPaper to avoid To order HP Color LaserJet printing supplies Configuring trays Configuring sizeConfiguring type Configuring tray 1 for custom paperUnit of measure Configuring tray 2 or tray 3 for custom paperDimension Setting a custom size in tray 2 or tray Printing from tray 1 multipurpose trayLoading paper into tray Enww Printing envelopes from tray To load envelopes into trayPrinting envelopes Address type Left margin Top margin Printing from tray 2 and trayLoading tray Enww Enww Loading tray Enww Slide the tray back into the printer Printing tasks Automatic media type sensing auto sense mode Full sensing defaultTray 1 sensing Expanded sensingTransparency only default Tray 2 or tray 3 sensingUsing features in the Windows printer driver Creating and using quick setsTo create a quick set To use quick setsUsing watermarks Setting a custom paper size from the printer driverResizing documents To reduce or enlarge a documentPrinting multiple pages on one sheet of paper Using different paper and printing coversPrinting a blank first Setting the color options Using the HP Digital Imaging Options dialog boxTo set the color options Opening the HP Digital Imaging Options dialog boxUsing the Services tab Using features in the Macintosh printer driver Creating and using presets in Mac OSTo create a preset To use presetsUsing features in the Macintosh printer driver Printing on special media TransparenciesGlossy paper Colored paperHeavy paper EnvelopesLabels Recycled paper HP LaserJet Tough paperPreprinted forms and letterhead Using 2-sided duplex printing Automatic 2-sided printingControl-panel settings for automatic 2-sided printing Options for binding 2-sided printing jobsManual 2-sided printing To turn 2-sided printing on or off from the control panelTo manually print on two sides duplex On the Finishing tab, select Print on Both Sides ManuallyManaging special printing situations Printing a different firstPrinting on custom-size media Stopping a print requestManaging special printing situations To delete a stored job Managing stored jobsTo print a stored job Managing memory Enww Managing the printer Using printer information pages Description How to print Menu map Press MenuConfiguration Supplies statusDescription How to print Color usage logConfiguring e-mail alerts Software Information locationUsing the embedded Web server Embedded Web server sectionsOr Sleep mode on Settings tabTab or section Information tabOther links Tab or section DescriptionNetworking tab Using the HP Easy Printer Care Software Supported operating systemsTo use the HP Easy Printer Care Software HP Easy Printer Care Software sectionsAlert Settings window Support tabSupplies Ordering window Device List tabUsing the HP Printer Utility for Macintosh HP Printer Utility featuresOpening the HP Printer Utility To open the HP Printer Utility in Mac OS XIP Settings Enww Color Using color HP ImageREtMedia selection Color optionsPrinting in four colors Cmyk Cmyk ink-set emulation PostScript onlyAutomatic or manual color adjustment Setting descriptionManaging color Print in GrayscaleSetting description Setting options Restricting color printingNeutral Grays Edge ControlEnww Printing color samples Matching colorsSample book color matching Enww Maintenance Approximate print-cartridge replacement intervals Managing suppliesSupplies life Checking the print-cartridge lifePrint-cartridge storage 1Printer displayPrint-cartridge authentication HP print cartridgesNon-HP print cartridges HP fraud hotline and Web siteChanging print cartridges Supply replacement guidelinesReplacing supplies and parts To change the print cartridge Enww Enww Cleaning the printer To clean the printer using the printer control panelEnww Problem solving Basic troubleshooting checklist Factors that affect printer performanceControl-panel message types Message type Description Status messagesControl-panel messages Clear jam then press 13.XX.YY JAM Inside Front Door13.XX.YY JAM Inside TOP Cover Insufficient MemoryParallel I/O Buffer Overflow Serial I/O Buffer OverflowUSB I/O Buffer Overflow BAD Serial TransmissionError Xxxxx ErrorFuser Error XY ErrorStorage Error Settings Xxxx Error8X.YYYY EIO Error No SystemCleaning Disk X% Complete Do not Power OFFAction not Currently Available On TrayCode CRC Error Close TOP Cover and Front DoorColor RFU Failed Data ReceivedInstall Color Cartridge Install FuserInstall Supplies Inflate FailureNON HP Supply Installed Manually Feed Type SizeManually Feed Output Stack MEM Test Failure Replace DimmOrder Color Cartridge Order SuppliesPaper Path JAM Front Door Printing StoppedProcessing Duplex JOB RAM Disk Device Failure RAM Disk File Operation FailedRAM Disk File System is Full RAM Disk is Write ProtectedReplace Supplies RFU Load Error Sanitizing Disk X% CompleteSize Mismatch in Tray Standard TOP BIN FullUSB Accessory Error Tray XX Open or EmptyType Mismatch in Tray USB Storage Device FailureUSB Storage File System is Full USB Storage is Write ProtectedUSB Storage X Removed USE Tray X Type SizeJams Jam recoveryTo turn off jam recovery Jams Common causes of jams1 Cause Solution Common causes of jamsClearing jams Jam in trayJam in tray 2 or tray Enww Jam inside the fuser area top cover Enww Jam inside the front door Enww Jam in the duplex path Enww Enww Paper-handling problems Printer feeds multiple sheets Cause SolutionPrinter feeds incorrect page size Cause Solution Printer pulls from an incorrect tray Cause SolutionMedia does not feed automatically Cause Solution Media does not feed from trays 2 Cause SolutionTransparencies or glossy paper will not feed Cause Solution Media does not feed from trays 2 CauseOutput is curled or wrinkled Cause Solution Cause SolutionSee Gaining access to printer driver settings Troubleshooting-information pages Paper-path-testPrinter response problems Control-panel display is blank Cause SolutionControl-panel display is difficult to read Cause Solution Printer is on, but nothing prints Cause SolutionPrinter is on but is not receiving data Cause Solution Cannot select the printer from the computer Cause SolutionEnww Printer control-panel problems Control-panel settings do not work correctly Cause SolutionColor-printing problems Printing black instead of color Cause SolutionIncorrect hues print Cause Solution Color is missing Cause SolutionPrinted colors do not match screen colors Cause Solution Click SettingsPrinter output problems Incorrect fonts print Cause SolutionCannot print all characters in a symbol set Cause Solution Text drifts between pages Cause SolutionPartial printout Cause Solution Guidelines for printing with different fontsPrint job was not sent to the printer Cause Solution Macintosh problemsSolving problems with Mac OS Port Hardware troubleshooting Folder Library/Printers/PPDs/Contents/ResourcesAn EPS file prints with incorrect fonts Cause Software troubleshooting Software program problems Cannot change system selections Cause SolutionCannot select a font from the software Cause Solution Cannot select colors Cause SolutionOverhead transparency defects Print-quality troubleshootingPrint-quality problems associated with media Print-quality-troubleshooting pages Print-quality problems associated with the environmentPrint quality problems associated with jams Calibrating the printer Enww Supplies and accessories Parts and supplies Part Part number Type/sizeParts and supplies Ordering by using the embedded Web server Service and support Hewlett-Packard limited warranty statement HP Product Duration of Limited WarrantyPrint cartridge limited warranty statement HP maintenance agreements On-site service agreementsExtended warranty Next-day on-site serviceRepacking the printer To repack the printerEnww Product Height Depth Width Weight Printer specificationsPhysical specifications Electrical specifications Volt modelsPower-consumption specifications Table C-5Power consumption average, in watts1Sound pressure level bystander position Declared per ISO Acoustic specificationsSound power level Declared per ISO Operating-environment specifications Environment Recommended AllowedEnww Regulatory information FCC regulations Environmental product stewardship program Paper Material restrictionsHP Color LaserJet 3000 and 3800 Series printers HP Color LaserJet 3600 Series printerMaterial Safety Data Sheet Msds Extended warranty For more informationDeclaration of conformity HP Color LaserJet 3000 series Declaration of ConformityDeclares, that the product Product Names Canadian DOC regulations Safety statementsLaser safety Laser statement for Finland Luokan 1 laserlaiteEnww Working with memory Printer memoryInstalling memory DIMMs To install memory and font DIMMsInstalling memory DIMMs To enable memory for Windows Enabling memoryChecking Dimm installation To check Dimm installationEnww Glossary Bidirectional communication Two-way data transmissionEnww Symbols/Numerics 2-sided printing IndexMacintosh FCC Enww Page Q5982-90971
Related manuals
Manual 226 pages 58.6 Kb Manual 74 pages 42.16 Kb Manual 23 pages 51.01 Kb
Top Page Image Contents