Print-media specifications
For optimum results, HP recommends using HP media that is designed for HP Color LaserJet printers. Use media with a weight between 75 g/m2 to 120 g/m2 (20 to 32 lb bond). Although the printer supports media with weights between 60 g/m2 to 176 g/m2 (16 to 47 lb bond), using lighter or heavier media could impact the
Always use the correct
Supported media types
Table 1-7 Tray 1 media types
Type | Dimensions | Weight or thickness | Capacity1 |
|
|
|
|
Plain | Minimum: 76 x 127 mm (3 x 5 in) |
|
|
Glossy paper | Maximum: 216 x 356 mm |
| (8.5 x 14 in) |
Transparencies2
Envelopes
Labels
Cardstock
60 to 163 g/m2 (16 to 43 lb bond) | 100 sheets |
HP Color LaserJet 3600 and 3800: 75 to | 60 sheets |
176 g/m2 (20 to 47 lb bond) |
|
HP Color LaserJet 3000: 75 to 120 g/m2 (20 |
|
to 32 lb bond) |
|
|
|
0.12 to 0.13 mm thick (4.7 to 5 mils thick) | 60 sheets |
|
|
60 to 90 g/m2 (16 to 24 lb bond) | 10 envelopes |
75 to 163 g/m2 (20 to 43 lb bond) | 60 sheets |
163 to 176 g/m2 (43 to 47 lb cover) | 60 sheets |
1Capacity can vary depending on media weight and thickness and environmental conditions. Smoothness should be 100 to 250 (Sheffield). For ordering information, see Supplies and accessories.
2Use only transparencies that are designed for use with HP Color LaserJet printers. This printer can detect transparencies that were not designed for use with HP Color LaserJet printers. For more information, see Print Quality
Table 1-8 Tray 2 and tray 3 media types
Type | Dimensions | Weight or thickness | Tray 2 capacity1 Tray 3 |
|
|
| capacity1 |
|
|
|
|
Plain | Minimum: 148 x 210 mm (5.83 | |
| x 8.27 in) | |
Glossy paper | ||
Maximum: 215.9 x 355.6 mm | ||
| ||
Transparencies2 | ||
(8.5 x 14 in) | ||
|
| |
Labels |
|
60 to 120 g/m2 | (16 to 32 lb bond) | 250 sheets | 500 sheets |
106 to 120 g/m2 (28 to 32 lb bond) | 100 sheets | 200 sheets | |
0.12 to 0.13 mm thick (4.7 to 5 mils | 50 sheets | 100 sheets | |
thick) |
|
|
|
|
|
|
|
75 to 163 g/m2 | (20 to 43 lb bond) | 50 sheets | 100 sheets |
1The printer supports a wide range of standard and custom sizes of print media. Capacity can vary depending on media weight and thickness and environmental conditions. Smoothness should be 100 to 250 (Sheffield). For ordering information, see Supplies and accessories.
2Use only transparencies that are designed for use with HP Color LaserJet printers. This printer can detect transparencies that were not designed for use with HP Color LaserJet printers. For more information, see Print Quality
14 Chapter 1 Printer basics | ENWW |