Envelopes
NOTE Envelopes can be printed only from tray 1. Set the tray media size to the specific envelope size. See Printing envelopes from tray 1.
Adhere to the following guidelines to help ensure proper printing on envelopes and to help prevent printer jams:
●Do not load more than 10 envelopes into tray 1.
●The weight rating of envelopes should not exceed 90 g/m2 (24 lb bond).
●Envelopes should be flat.
●Do not use envelopes with windows or clasps.
●Envelopes must not be wrinkled, nicked, or otherwise damaged.
●Envelopes with
●Envelopes should be loaded
NOTE In high humidity environments, envelopes should be printed
Labels
●
●
●
●
●
NOTE In either the application or the printer driver, select Labels as the media type, or configure tray 1 for labels. See Configuring trays.
Verify that the labels’ adhesive material can tolerate temperatures of 190° C (374° F) for 0.1 second.
Verify that there is no exposed adhesive material between the labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to printer components.
Do not
Verify that labels lie flat.
Do not use labels that are wrinkled, bubbled, or otherwise damaged.
Heavy paper
●Any tray will print most heavy media that does not exceed 105 g/m2 (28 lb bond).
●Use cardstock (135 g/m2 to 176 g/m2 (36 to 47 lb bond)) only in tray 1.
●In either the software application or the printer driver, select Heavy (106 g/m2 to 163 g/m2 (28 to 43 lb bond)) or Cardstock (135 g/m2 to 176 g/m2 (36 to 47 lb bond)) as the media type, or print from a tray that is configured for heavy paper. Because this setting affects all print jobs, it is important to return the printer back to its original settings once the job has printed. See Configuring trays.
ENWW | Printing on special media 77 |