HP 2100 manual Windows NT 4.0 PS To use an existing watermark

Watermarks (continued)

Printer Driver	Procedure
Windows NT 4.0 PS	To use an existing watermark
	1.	Access the printer driver.
	2.	From the Advanced tab, click Document Options, then
		Printer Features to expand their subentries.
	3.	Click on each desired Watermark option (Watermark,
		Watermark Font, Watermark Size, Watermark Angle,
		Watermark Style, and Print Watermark) and select the
		desired setting for each option.
	4.	Click OK.
	To stop printing the watermark, click Watermark and select
	“none” in the Change ‘Watermark’ Setting box.
	The Windows NT 4.0 PS printer driver does not support
	user-defined watermarks. If you want to create a
	watermark, use the HP PCL 6 printer driver.
Windows 9x PS	To use an existing watermark
	1.	Access the printer driver.
	2.	From the Device Options tab, click on each desired
		Watermark option (Watermark, Watermark Font,
		Watermark Size, Watermark Angle, Watermark Style,
		and Print Watermark) and select the desired setting
		for each option.
	3.	Click OK.
	To stop printing the watermark, click Watermark and select
	“none” in the Change ‘Watermark’ Setting box.

The Windows 9x PS printer driver does not support user- defined watermarks. If you want to create a watermark, use the HP PCL 6 printer driver.

Macintosh LaserWriter 8.3

1.Select Page Setup from the File menu.

2.Select Options.

3.Click the pop-up for each desired watermark option and select the desired setting.

4.Click OK.

To stop printing watermarks, select “None” or “Printer’s default” from the Watermark/Overlay pop-up.

48 Chapter 2 Printing Tasks EN