HP 2500CM manual Configuration Menu Values Explanation, MIO Menu

Configuration Menu

Item	Values	Explanation
PERSONALITY=	AUTO	Select the default printer language
AUTO	PCL	(personality).
	PS	Possible values are determined by which valid
	PCL 5	languages are installed in the printer. For
	HPCGL2	example, if you have the PS module installed,
		you will be able to select between AUTO, PCL or
		PS. Similarly, if you have installed the PCL 5
		module, you will be able to select PCL 5, PCL,
		AUTO or HPCGL2.
		Normally you should not change the printer
		language (the default is AUTO). If you change it
		to a specific printer language, the printer will not
		automatically switch from one language to
		another unless specific software commands are
		sent to the printer.

MIO Menu

The MIO print server that is installed controls this menu and it varies accordingly. Please refer to the documentation that comes with the print server for more information.

PostScript Menu (for HP 2500CM printer or with the HP 2500C PostScript Upgrade Kit only)

Item	Values	Explanation
PRINT PS ERRORS=	OFF	Select ON to print the PS error page when PS errors occur.
OFF (for PostScript)	ON
PRINT PCL ERRORS=	OFF	Select ON to print the PCL5C error page when PCL 5 errors
OFF (for PCL5)	ON	occur.
JAM RECOVERY=	AUTO	Determine how the printer behaves when a paper jam occurs.
AUTO	ON
	OFF	AUTO: The printer automatically selects the best mode for
		printer jam recovery (usually ON). This is the default setting.
		ON: The printer automatically reprints pages after a paper
		jam is cleared.
		OFF: The printer does not reprint pages following a paper jam.
		Printing performance might be increased with this setting.
COPIES=1	1 to 99	Set the default number of copies by selecting any number
		from 1 to 99. Press [Value] once to change the setting by
		increments of 1 or holddown [Value] to scroll.
RESOURCE SAVE=OFF	OFF	PCL5C downloaded objects are lost when the interpreter
(for PCL5 only)	ON	is ended
		PCL5C downloaded objects are saved between active sessions
		of the interpreter. When the interpreter is restarted the previous
		state of the interpreter is restored.
			33