HP 2500CM manual Manufacturers Name, Product Name, Model Number, Product Options, Safety

Page 63

HP

2500C/C+/CM

Declaration of Conformity

 

 

 

DECLARATION OF CONFORMITY

according to ISO/IEC Guide 22 and EN 45014

Manufacturer's Name:

Hewlett-Packard Singapore (Pte) Ltd

Manufacturer's Address:

Asia Hardcopy Manufacturing Operation

 

20 Gul Way, Singapore 629196

declares, that the product

 

Product Name:

HP2500C, HP2500Cse, HP2500Cxi, HP2500C+, HP2500CM*

Model Number:

C2684A/B, C2686A, C2687A, C2692A, C2685A/B

Product Options:

All

conforms to the following Product Specifications:

Safety:

IEC 950: 1991 + A1 + A2 + A3 + A4/ EN 60950: 1992 + A1 + A2 + A3 + A4

 

IEC825-1: 1993 / EN 60825-1:1994 class I for LEDs

EMC:

CISPR 22: 1993 Class B / EN 55022: 1994 Class B

 

CISPR 22: 1993 Class A / EN 55022: 1994 Class A*

EN 50082-1: 1992

IEC 801-2: 1991 / prEN 55024-2: 1992, 4kV CD, 8kV AD

IEC 801-3: 1984 / prEN 55024-3: 1991, 3 V/m

IEC 801-4: 1988 / prEN 55024-4: 1992, 0.5kV Signal Lines, 1kV Power Lines

IEC 1000-3-2: 1995 / EN61000-3-2: 1995

IEC 1000-3-3: 1994 / EN61000-3-3: 1995

FCC Title 47 CFR, Part 15 Class B / VCCI-2

FCC Title 47 CFR, Part 15 Class A / VCCI-1*

AS / NZS 3548: 1995/ ICES-003, Issue 2

Supplementary Information:

(1)The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC, and carries the CE Marking accordingly.

(2)The product was tested in a typical configuration with Hewlett Packard personal computer systems. (3)This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

*This printer contains Local Area Network (LAN) options. When the interface cable is attached to either of the IEEE802.3 connectors, the printer meets the requirements of CISPR 22: 1993 Class A /EN 55022: 1994 Class A

Singapore, May 1999

Chan Kum Yew, Quality Manager

Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd, 31-41 Joseph Street, Blackburn,Victoria 3130, Australia

European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh, Department

HQ-TRE / Standards Europe, Herrenberger Stra§e 130, D-71034 Bšblingen (FAX: +49-7031-14-3143)

USA Contact: Corporate Product Regulations Manager, Hewlett-Packard Company, 3000 Hanover Street,

Palo Alto, CA 94304 (Phone: 415-857-1501)

59

Image 63
Contents Userõs Guide Edition 2 Ð June AcknowledgmentsContents Series Toolbox in Windows 95, 98 and NT TroubleshootingRecommended Please ensure that you have the following computer setupPrinter Features and Benefits System RequirementsDelivery System Mids Printer Parts and LocationsControl Panel Layout Control Panel Keys LEDsOr requires attention Adequate power supply Setup PosterSturdy, level surface for placement Based cleaning solutionsHP JetDirect internal print server Ensure that the computer is turned off¥ German ¥ Finnish ¥ French Install Ink Cartridges Make sure the printer is turned on Remove the protective tape from each printheadPush the printheads down firmly Load Paper in Tray Page 330 x 483 mm Align Printheads Customizing the Printer Software Install the Printer SoftwareTo do this Installing the PostScript Printer Software into a PCLoading the Trays Loading Media in TrayPress the button to print Loading Media in the Rear Manual Feed Press to start printingMonitoring and Replacing Ink Cartridges Replacing Printheads PCL Printer Software Components Using the HP 2500C Series Printer SoftwareClick Close and exit the Control Panel Changing Print Settings Select Your PrinterUsing the Printer on a Network Printing with Special Features and OptionsMirror Image Select a Special FeatureHP ZoomSmart Scaling Technology WatermarkClean Printheads Maintaining the PrinterAlign Printheads When you have finished entering the values press Select Calibrate ColorPostScript Printing Memory Requirements Page PS FW VER Installing Additional Memory Page Overview Control Panel MenusPaper Handling Menu Values Explanation PlainHP Photo Information Menu Explanation Diagnostics Menu ExplanationPrint Quality Menu Values Explanation Self Test Menu ExplanationPrinting Menu Values Explanation IO Menu Values Explanation Resets Menu ExplanationConfiguration Menu Values Explanation MIO MenuValues Explanation Understanding Printer Messages Explanation Solution Tray 2 Paper OUTRight Back Panel OUTPaper Size Wrong MediaTYPE, Action UnexpectedXxxx General Troubleshooting TipsLCD Error Type Example Function ReinsertTroubleshooting Feature in Toolbox Non-Recoverable Error¥ Check network setup Printer does not Print ¥ Check the power¥ Check printer setup ¥ Print a DiagnosticText or Graphics are Cut Off ¥ Check margin settings Bad or Poor Print Quality ¥ Check print quality setting¥ Check paper type setting ¥ Clean printheadsGarbage Printed ¥ Check cable connection ¥ Check document fileClearing Paper Jams Printhead Diagnostics Tips for Avoiding Paper Jams¥ Make sure nothing is blocking the paper paths Page Understanding the Diagnostic Test Description Indonesia 21-352 Korea For customers in Asia-Pacific AustraliaChina Hong Kong 2506 IndiaIndonesia 21 350 Korea United KingdomFor Asia-Pacific Australia Hong Kong 800 96 IndiaNumber Description HP Premium Transparency Film C6043AColor Highlights Letter / A4 11 x 17 / A3 Color ResolutionPrint Method Black Text Letter / A4 11 x 17 / A3Memory HP 2500CM HP 2500C & HP 2500C+Management Handling Maximum PrintArea Media Size, TypeRear Manual Feed Media WeightFeatures Media Size, Type Tray 3 Lower Tray Handling Sheets Up toWarranty Power SupplyDimensions WeightOr 100 x 148mm to 137Ó 117Ó 330 x 483mm 97mm 12.7mm Paper SizeExtent of Limited Warranty Limitations of Liability Limitations of WarrantyLocal Law Product Name Conforms to the following Product SpecificationsSafety Manufacturers NamePower Cord Statement Safety InformationLEDs Classification Energy Consumption FCC Regulations Install the product securely on a stable surfaceManual Part No. C2685-90045
Related manuals
Manual 19 pages 46.3 Kb