HP 2500CM Out, Right Back, Panel OUT, Tray 2 Paper, Tray 1 Load, Type Size, Tray Number, Press

LEFT BACK PANEL	The left side of the Back	Open the Rear Access Door and ensure
OUT	Panel has not been	that the left side of the panel is
	inserted properly.	properly installed.
RIGHT BACK	The right side of the	Open the Rear Access Door and ensure
PANEL OUT	Back Panel has not	that the right side of the panel is
	been inserted properly.	properly installed.
TRAY 2 PAPER	One of the Paper Guides	Insert the missing Paper Guide back into
GUIDE REMOVED	in Tray 2 has been removed.	Tray 2.
TRAY 3 OPEN OR	Tray 3 is either open or one	Ensure that both the Paper Guides are
GUIDE REMOVED	of its Paper Guides has	properly installed and that Tray 3
	been removed.	is inserted into the printer.
TRAY 1 LOAD	You have chosen to print	Load the paper type and size as
[TYPE] [SIZE]	from Tray 1 or the media	specified in the LCD panel and press
	you have selected differs	to continue printing. You may
	from those in Trays 2 and 3.	set the printer to print with existing
		media in Tray 2 or Tray 3 by either
		pressing [Value] or without loading
		media in Tray 1.
MNL FEED LOAD	You have chosen to print	Load the paper type and size as
[TYPE] [SIZE]	through the Rear Manual	specified in the LCD panel into the
	Feed.	Rear Manual Feed located at the back
		of the printer and press to continue
		printing.
TRAY [NUMBER]	The specified tray is empty.	Load the paper size and type which
EMPTY, LOAD &		this tray has been set up for. If you
PRESS		wish to change the paper size setting of
		this tray, please refer to section on Load
		Paper.
USE [TYPE]	The media you have chosen	Press	to print or [Value] to select
[SIZE] INSTEAD?	differs from those in Trays 2	other options.
	and 3 and you have either
	pressed [Value] or without
	loading media in Tray 1.
PRESS TO	To continue your present
CONTINUE	task, press the button.
MEDIA IN TRAY 1,	The media in Tray 1 may	Remove the media in Tray 1 and press
REMOVE	not be the type or size	the	button to resume printing.
	that is specified in your
	current print job.	If you wish to print through Tray 1, set
		your print setting to pick from Tray 1
		and send the print job before putting
		media in Tray 1.

35