Toshiba RAV-SM1404BT-E, RAV-SM454MUT-E, RAV-SM404MUT-TR 100, No. Part name Procedure Remarks

10-3. Ceiling Type

RAV-SM∗∗∗CT ∗

Be sure to turn off the power supply or circuit breaker before disassembling work

No. Part name	Procedure	Remarks
• Suction grille 1.	Remove the screws of air intake	Pull out suction grille
	grille fixing knob on a side of each	while pushing hook.
	filter.
2.	Slide the suction grille fixing knobs	Hinge
	(2 positions) toward the arrow
	direction of left figure, and open
	the suction grille.

3. Under the condition of the suction grille opened, push the hook section of hinges (2 positions) at the rear side, and then pull out the suction grille.

Suction grille	Suction grille
fixing knob

‚ Side panel	1.	Open the suction grille.
	2.	After removing the side panel	Protector
		screws (2 positions), slide the side
			Side panel
		panel forward and then remove it.

			Level flap
			Slide forward.
ƒ Electrical	1.	Remove the suction grille.	Electrical parts cover
parts box	2.	Loosen the set screws
		(2 positions) of the electrical parts
		cover.
	3.	Remove the electrical parts cover.
	4.	Remove the set screws
		(2 positions) of the electrical parts	3	-2
		box.
			3	-3
	5.	Remove the electrical parts box.
			Screws
	In this time, remove connectors of TA		(Fixing electrical parts cover and box)
	sensor, TC sensor and TCJ sensor if
	necessary.

3 -4

3 -5

Electrical parts box

Screws

(Fixing electrical parts box and main unit)

– 100 –