Toshiba RAV-SM1404BT-TR, RAV-SM454MUT-E Wireless remote controller, Operation, Setup method

Standalone receiver (TCB-AX21E2)

8-1-5. Cabling and Setting of Remote Controller Control

2-remote controller control (Controlled by 2 remote controllers)

This control is to operate 1 or multiple indoor units are controlled by 2 remote controllers.

(Max. 2 remote controllers are connectable.)

•When connected 2 remote controllers operate an idoor unit

Remote controller	Remote controller
switch (Master)	switch (Sub)
Sold	Sold
separately	separately
A B	A B
	Remote controller
	cables (Procured locally)
	Terminal block for
	remote controller cables

A B

Indoor unit

1 2 3

1 2 3

Outdoor unit

•When connected 2 remote controllers operate the twin

Remote controller				Remote controller
switch (Master)				switch (Sub)
	Sold		Remote controller		Sold
			inter-unit wire
separately				separately
			(Procured locally)
	A	B			A	B

Terminal block for remote controller cables

<Wired remote controller>

How to set wired remote controller as sub remote controller

Change DIP switch inside of the rear side of the remote controller switch from remote controller master to sub. (In case of RBC-AMT32E)

Remote controller (Inside of the rear side)

1 2

Sub remote controller

Master remote controller

1 2

DIP switch

1 2

<Wireless remote controller>

How to set wireless remote controller to sub remote controller

[Remote controller Sub/Master]

DIP SW

[Operation]

1.The operation contents can be changed by Last- push-priority.

2.Use a timer on either Master remote controller or Sub remote controller.

<Wireless remote controller>

A B

Indoor unit 1

1	2	3
1	2	3

Outdoor unit

A B

Indoor unit 2

1 2 3

Inter-unit wiring between indoor units (Procured locally)

(Ceiling Type)

How to set wireless remote controller as sub remote controller

Turn Bit [3: Remote controller Sub/Master] of the switch S003 from OFF to ON.

Rear cover

ON

1 2 3 4

Receiver P.C. board

ON

(Setup method)		S003
	Upper case	Bit 3 : OFF → ON
One or multiple indoor units are controlled by two		ON
		1	2 3 4 ON
remote controllers.
(Max. 2 remote controllers are connectable.)

– 74 –