Toshiba RAV-SM564BT-E, RAV-SM454MUT-E, RAV-SM404MUT-TR Outline of specifications Remarks

No.	Item		Outline of specifications	Remarks
21	8°C heating/Frost	1)	This functional is intended for the cold latitudes and
	protective operation		performs objective heating operation
			(8°C heating operation).	In a group connection,
		2)	This function is valid only for combination with the	if there is even one
			outdoor units.	combination with other
		3)	Using the indoor CODE No. [D1] (1 bit), Valid/Invalid of	unit, “This function is not
				provided.” is displayed.
			this function is set up at the customer’s side.

∗The setup by CODE No. is Invalid [0]/Valid [1] and Invalid [0] has been set at the shipment.

4)This operation is the heating operation which sets 8°C

as the setup temperature of the target.		The setup temperature
5) This function starts operation by pushing temperature		jumps from [18] to [8].
button	during heating operation; besides by
pushing	button for 4 seconds or more after
temperature reached the minimum set temperature.

6)To stop/release this operation, select and execute one from the following operations.

Q Push button:

Heating operation 18°C setting) continues.

R Push [START/STOP] button: Air conditioner stops.

(Heating 18°C operation at the next start)

S Push MODE :

Other operation mode is selected and the operation continues.

7)As the setup temperature is 8°C and the human heating is not targeted, the cold air discharge preventive control (Item 7) is made invalid to suppress the intermittent operation.

8)The settings of the air direction and air volume are changeable during this operation.

9)The indoor fan stops to protect the compressor for 2 minutes after start of heating operation (Thermo-ON) by this function.

– 39 –