Toshiba RAM-SM800AT-E, RAM-SM800KRT-E If you do not plan to use the unit for more than 1 month

Page 28

If you do not plan to use the unit for more than 1 month

(1)Operate the fan for 3 to 4 hours to dry inside the unit

• Operate “FAN ONLY” mode with set temperature 30°C.

(2)Stop the air conditioner and turn off the main power switch or the circuit breaker.

Checks before operation

(1)Check that the air filters are installed.

(2)Check that the air outlet or inlet is not blocked.

(3)Turn on the main power switch or the circuit breaker for the mains AC outlet to turn on the air conditioner.

FAN ONLY operation or thermo.-off operation

WARNING

Make sure to ask the qualified maintenance professional for cleaning.

Turn off the main power supply switch or breaker before the unit maintenance.

Before maintenance, be sure to turn off the leakage breaker.

Cleaning of air filter

•

If

is displayed on the remote controller, maintain the air filter.

•

Clogging of the air filter reduce cooling/heating performance.

Cleaning of panel and air filter

Suction grille

 

Preparation :

 

1. Turn off the air conditioner by the remote controller.

2. Open the suction air port.

Button

 

•Slide the button of the suction air port inward, and open the suction port slowly while holding it.

Clean the panel and air filter with water:

•Wipe down the panel and air filter with a sponge or towel moistened with a kitchen detergent. (Do not use any metallic brush for cleaning.)

•Carefully rinse the panel and air filter to wash out the detergent.

• After rinsing the panel and air filter with water, dry it in the shade.

Suction grille

 

3. Close the suction air port.

• Close the suction air port, slide the button outward, and fix the suction port securely.

CAUTION

•Do not start the air conditioner while leaving the panel and air filter removed.

•Push the filter reset button. ( indication will be turn off.)

Button

Cleaning of Air Filters

•Recommended cleaning intervals: Every two weeks.

•If the air filters are not cleaned, it not only reduce the cooling a performance of air conditioner but causes a failure in the air conditioner such as water falling in drops.

Preparation :

1.Stop the operation by remote controller.

2.Dismount the air filter.

Strap to prevent falling

Air filter

Push

25

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Split Type Way Air Discharge Cassette Type Installation Manual Outdoor Unit --------- RAV-SM800AT-E/RAV-SM800AT-EPrecautions for Safety New Refrigerant Air Conditioner InstallationTo Disconnect the Appliance from Main Power Supply Connect the connecting cable correctlyInappropriate grounding may cause electric shock Accessory and Refrigerant Selection of InstallationAccessory and Installation Parts Before installationInstallation Place Necessary Space for InstallationObstacle at rear side Upper side is free Obstacle at front side Upper side is freeSelection of Installation Installation of Outdoor UnitRefrigerant Piping Connection Optional Installation Parts Local ProcurePiping connection How to remove the front panel Knockout procedureKnockout of Pipe Cover Refrigerant Piping Pipe Forming/End PositioningFlaring size a Unit mm FlaringRefrigerant Piping Tightening of Connecting PartRequirement Air Purge EvacuatingVacuum pump Evacuating Open CloseSM560AT-E How to remove the valve cover How to wireStripping length power cord and connecting cable Electrical WorkCheck and Test Operation Final Installation ChecksSelf-Diagnosis by LED Indication Changes in the product and components New tools for R410AAccessories Precautions for SafetyRemote controller Screws two pcs Standard 4-way cassette panel optional partsRAV-SM560UT-E RAV-SM800UT-E Indoor unit Parts NameOutdoor unit Parts Name of Remote Controller Display sectionOperation section Correct Usage Turn on the main power switch and/or the leakage breakerPreparation Start StopPush button How to set up the wind direction How to start swingingHow to stop swinging Heat operationTimer operation Timer OperationCancel of timer operation Maintenance Hints for Economical OperationCleaning of panel and air filter Clean the panel and air filter with waterCleaning of Air Filters If you do not plan to use the unit for more than 1 monthCleaning of discharge flap Be careful to the direction of the flap when mountingAIR Conditioner Operations and Performance RE-INSTALLATION Do not install the air conditioner in the following placesTroubles and Causes Be careful with noise or vibrationsInoperative Page Accessory parts and Parts to be procured locally Separate sold partsPrecautions for Safety Precautions for Safety Installation space Selection of Installation PlaceAvoid installing in the following places Selection of Installation Place Selection of installation place Discharge directionAdvice Height list of ceiling possible to be installedExternal view Installation of hanging bolt Installation of ceiling opening and hanging boltInstallation of ceiling panel Sold separately Drain Piping Work Piping/Heat insulating materialFlexible hose Adhesive inhibitedConnection procedure Drain upCheck the draining Perform heat insulatingPermissible Piping Length and Heat Flaring dia meter size a Unit mmTightening connection Tightening torque of flare pipe connectionsUse a vacuum pump Open the valve fullyGas leak check Thermal insulation processFor RAV-SM800AT-E model Packed valve handling precautionsSM800 type valve at gas side Be sure to connect earth wire. Grounding work Remote controller wiringThermal insulation to cabling connecting port Electrical WorkCable connection Cabling on the ceiling panelCabling diagram Remote Controller CablingCabling How to execute a test run Case of wired remote controllerTest RUN Before test runConfirmation of error history TroubleshootingConfirmation and check Accessories RAV-SM560BT-E RAV-SM800BT-E Connecting duct Fan mode display Operation mode displayTest run display Unit and Auto flap button No function Operation lamp Fan mode button ButtonFilter UP/DOWN button Correct Usage Automatic Operation Auto Changeover Clear of timer operation Do not open doors and windows more often than necessary Cleaning of Return grille Clean the Return grilles with waterAIR Conditioner Operations and Performance RE-INSTALLATION Air flow changes without FAN button set to Auto mode Auto RAV-SM560BT-E RAV-SM800BT-E Precautions for Safety Precautions for Safety Selection of installation place Installation of Indoor Unit Installation procedureDimension Hanging down of indoor unitInstallation of Indoor Unit Restriction to installationConcealed duct type Ledge ceiling concealed duct typeStatic pressure characteristics of each model AIR Ducting WorkConnecting method of the duct AIR Ducting WorkPoints at installation work General cautionsMounting of remote controller Hanging of indoor unitMounting of filter and canvas for suction port For referencePiping and cautions Piping materialConnection of the drain hose 13.2 13.0 12.7 16.6 16.2 15.9 19.7 19.4 SM800 type valve at gas side Electrical Work INSTALLATION/SERVICING Tools ToolsRemote controller RAV-SM560KRT-E RAV-SM800KRT-E Display panel Name and Functions of Indicators and ControlsTemporary button Name and Operations of Indicators and Controls Set up temp. button Central indicationLouver operation button ON/OFF buttonTurn on the power switch When restarting the operation after stopPush ON/OFF button CoolingSTART/STOP button DRY OperationSTART/STOP button HOW the AIR Conditioner Works Adjusting AIR Flow DirectionAutomatic operation Air filter reset Cleaning of indoor unit and remote controllerTemporary Operation Temporary operationCleaning the air filter Clean the air filters as often as possibleCheck before operation Open the air inlet grilleHeating operation characteristics Preheating operation Cleaning the air inlet grilleMinute protection function Warm air controlProblems and Causes RecheckInoperative Does not cool well or heat wellWired remote Precautions for Safety Precautions for Safety Installation Procedure Installation Diagram of Indoor UnitMounting the Installation Plate When the installation plate is directly mounted on the wallGood location Bad location Piping and Drain Hose Installation Case of right-side exitCase of downward pipe exit Piping via left-hand connectionDrain Piping Work DrainagePermissible Piping Length and Head Evacuating 100 For RAV-SM560AT-E modelAdditional refrigerant 101Add Only R410A Refrigerant to These Units Heat insulation Wiring connections Wiring between units102 Installation of Remote Controllers Precautions103 Flush wall mountingOptions Improving System Efficiency104 Final Installation Checks 105Environmental Issues Product maintenanceEnvironment 106

RAM-SM560BT-E, RAM-SM560KRT-E, RAM-SM800UT-E, RAM-SM800AT-E, RAM-SM560UT-E specifications

Toshiba has established itself as a leader in the memory module market with a range of products tailored for various computing needs. Among its offerings, the RAM-SM560AT-E, RAM-SM560UT-E, RAM-SM800KRT-E, RAM-SM800UT-E, and RAM-SM560BT-E stand out due to their advanced features, high performance, and reliable technologies.

The RAM-SM560AT-E is engineered for optimal efficiency and speed, specifically targeting the demands of modern applications. With a capacity of up to 8GB, this module leverages DDR4 technology, allowing for faster data transfers and improved energy efficiency compared to previous generations. The design focuses on low power consumption which is crucial for laptop users who seek longer battery life without compromising performance.

Next in line, the RAM-SM560UT-E offers similar capacities but is tailored with higher clock speeds. This model is particularly beneficial for gamers and professionals engaging in graphics-intensive tasks. Its enhanced throughput enables smoother multitasking and significantly reduces latency during operations that require extensive computational power.

The RAM-SM800KRT-E is a powerhouse within the lineup, boasting increased bandwidth and specifications that cater to high-end systems. Its capacity reaches up to 16GB, and it supports advanced features like dual-channel configuration, which maximizes performance by allowing simultaneous data transfer across channels. This is ideal for users working with large datasets, as it significantly accelerates processing times.

On the other hand, the RAM-SM800UT-E is designed for versatility, accommodating a broader range of devices, from ultrabooks to gaming laptops. Its emphasis on thermal management ensures reliability during extended usage. Coupled with error-correcting code (ECC) technology, it provides enhanced data integrity, making it suitable for mission-critical applications.

Lastly, the RAM-SM560BT-E is geared towards users who value balance between performance and cost. It features a robust construction and is compatible with a variety of motherboards. This makes it an excellent choice for upgrades in systems that require reliable performance without extensive investment.

In summary, Toshiba's RAM lineup, featuring the RAM-SM560AT-E, RAM-SM560UT-E, RAM-SM800KRT-E, RAM-SM800UT-E, and RAM-SM560BT-E, showcases a diverse array of memory solutions. Each model is built with cutting-edge technology, meeting the diverse demands of users ranging from casual home users to high-power gaming enthusiasts. With high capacity options, advanced data handling features, and energy-efficient designs, Toshiba continues to be at the forefront of memory technology.
Top Page Image Contents