Cleaning of Return grille

If you do not plan to use the unit for more than 1 month

(1)Operate the fan for 3 to 4 hours to dry inside the unit Operate “FAN ONLY” mode with set temperature 30°C.

(2)Stop the air conditioner and turn off the main power switch or the circuit breaker.

Checks before operation

(1)	Check that the air filters are installed.
(2)	Check that the air outlet or inlet is not blocked.
(3)	Turn on the main power switch or the circuit breaker for the mains AC	FAN ONLY operation
	outlet to turn on the air conditioner.	FAN ONLY operation

WARNING

Make sure to ask the qualified maintenance professional for cleaning.

Turn off the main power supply switch or breaker before the unit maintenance.

Preparation :

1.Turn off the air conditioner by the remote controller.

2.Dismount the Return grille.

Clean the Return grilles with water:

•Wipe down the Return grille with a sponge or towel moistened with a kitchen detergent. (Do not use any metallic brush for cleaning.)

•Carefully rinse the Return grille to wash out the detergent.

•After rinsing the Return grille with water, dry it in the shade.

CAUTION

• Do not start the air conditioner while leaving the return grille removed.

Cleaning of Air Filters

• Recommended cleaning intervals : Every two weeks.

• If the air filters are not cleared, it not only impairs the cooling performance of air conditioner but causes a failure in the air conditioner such as water drops.

Preparation :

1. Turn off the air conditioner by the remote controller.

2. Dismount the Return grille.

Use a vacuum cleaner to remove dust from the filters or wash them with water.

•After rinsing the air filters with water, dry them in the shade.

•Set the air filter into the air conditioner.

NOTE

For Air conditioning system which is operated regularly, cleaning and maintenance of the indoor/outdoor units are strongly recommended.

As a general rule, if an indoor unit is operated for about 8 hours daily, the indoor/outdoor units will need to be cleaned at least once every 3-MONTH. This cleaning and maintenance shall be carried out by a qualified person.

Failure to clean the indoor/outdoor units regularly will result in poor performance, icing, water leaking and even compressor failure.

RAM-SM560BT-E, RAM-SM560KRT-E, RAM-SM800UT-E, RAM-SM800AT-E, RAM-SM560UT-E specifications

Toshiba has established itself as a leader in the memory module market with a range of products tailored for various computing needs. Among its offerings, the RAM-SM560AT-E, RAM-SM560UT-E, RAM-SM800KRT-E, RAM-SM800UT-E, and RAM-SM560BT-E stand out due to their advanced features, high performance, and reliable technologies.

The RAM-SM560AT-E is engineered for optimal efficiency and speed, specifically targeting the demands of modern applications. With a capacity of up to 8GB, this module leverages DDR4 technology, allowing for faster data transfers and improved energy efficiency compared to previous generations. The design focuses on low power consumption which is crucial for laptop users who seek longer battery life without compromising performance.

Next in line, the RAM-SM560UT-E offers similar capacities but is tailored with higher clock speeds. This model is particularly beneficial for gamers and professionals engaging in graphics-intensive tasks. Its enhanced throughput enables smoother multitasking and significantly reduces latency during operations that require extensive computational power.

The RAM-SM800KRT-E is a powerhouse within the lineup, boasting increased bandwidth and specifications that cater to high-end systems. Its capacity reaches up to 16GB, and it supports advanced features like dual-channel configuration, which maximizes performance by allowing simultaneous data transfer across channels. This is ideal for users working with large datasets, as it significantly accelerates processing times.

On the other hand, the RAM-SM800UT-E is designed for versatility, accommodating a broader range of devices, from ultrabooks to gaming laptops. Its emphasis on thermal management ensures reliability during extended usage. Coupled with error-correcting code (ECC) technology, it provides enhanced data integrity, making it suitable for mission-critical applications.

Lastly, the RAM-SM560BT-E is geared towards users who value balance between performance and cost. It features a robust construction and is compatible with a variety of motherboards. This makes it an excellent choice for upgrades in systems that require reliable performance without extensive investment.

In summary, Toshiba's RAM lineup, featuring the RAM-SM560AT-E, RAM-SM560UT-E, RAM-SM800KRT-E, RAM-SM800UT-E, and RAM-SM560BT-E, showcases a diverse array of memory solutions. Each model is built with cutting-edge technology, meeting the diverse demands of users ranging from casual home users to high-power gaming enthusiasts. With high capacity options, advanced data handling features, and energy-efficient designs, Toshiba continues to be at the forefront of memory technology.