Turn on the power switch, Cooling, Heating

CORRECT USAGE

When you use the air conditioner at the first time or when you change the setup value, follow the procedure below. From the next time, the operation displayed on the remote controller will start only by pushing ON / OFF button.

Preparation

Turn on the power switch.

• The operation lamp (Red) flashes.

REQUIREMENT

•While using the air conditioner, operate it only with ON/OFF button without turning off the power switch.

•When starting the operation after stop for a long time, turn on the power switch for 12 hours or more before start. (This is required because it is necessary to turn on the compressor case heater for heating in order to prevent overload on the compressor when activating the outdoor unit.)

Select an operation mode with “MODE” button.

For every push of the button, the display changes as right figure :

Select air volume with the “FAN” button.

The display changes as follows :

FAN

COOL

HEAT

LOW

MED.

HIGH

AUTO

•When air volume is “AUTO”, air volume changes according to the room temperature.

3 Determine the set up temperature by pushing the “TEMP.” button.

4 Push “ON/OFF” button.

The operation lamp goes on, and the operation starts .

MODE FA N T EMP.

F A N CHECK	ADDRESS UNIT STANDBY
C O O L 1 2		FILTER
		PREHEAT
H E AT AU TO		DEFROST
H E AT AU TO	CENTRAL	LOUVER
F I X	CENTRAL	MANUAL
MODE
FILTER CHECK	2	3
1	2	3

	STOP	ON/OFF
	Push “ON/OFF” button.	4
	The operation lamp goes off, and the operation stops.	4
	The operation lamp goes off, and the operation stops.

NOTE

In cooling

• When the operation button is pushed, the operation starts approx. 1minute after.

In heating

•When pushing “ON/OFF” button, the indoor fan starts pre-heating operation for 3 to 5 minutes before it starts blowing out hot air.

•When the room temperature reaches the set up temperature and the outdoor unit stops, the mode becomes LOW and air volume decreases accordingly. During defrost operation, the fan stops so that cool air is not out, and “PREHEAT” and “DEFROST” are displayed.

When restarting the operation after stop

•In heating operation, the fan operation may continue for approx. 30 second.

•When restarting the operation immediately after stop, the air conditioner does not operate for approx. 3 minutes to protect the machine.

RAM-SM560BT-E, RAM-SM560KRT-E, RAM-SM800UT-E, RAM-SM800AT-E, RAM-SM560UT-E specifications

Toshiba has established itself as a leader in the memory module market with a range of products tailored for various computing needs. Among its offerings, the RAM-SM560AT-E, RAM-SM560UT-E, RAM-SM800KRT-E, RAM-SM800UT-E, and RAM-SM560BT-E stand out due to their advanced features, high performance, and reliable technologies.

The RAM-SM560AT-E is engineered for optimal efficiency and speed, specifically targeting the demands of modern applications. With a capacity of up to 8GB, this module leverages DDR4 technology, allowing for faster data transfers and improved energy efficiency compared to previous generations. The design focuses on low power consumption which is crucial for laptop users who seek longer battery life without compromising performance.

Next in line, the RAM-SM560UT-E offers similar capacities but is tailored with higher clock speeds. This model is particularly beneficial for gamers and professionals engaging in graphics-intensive tasks. Its enhanced throughput enables smoother multitasking and significantly reduces latency during operations that require extensive computational power.

The RAM-SM800KRT-E is a powerhouse within the lineup, boasting increased bandwidth and specifications that cater to high-end systems. Its capacity reaches up to 16GB, and it supports advanced features like dual-channel configuration, which maximizes performance by allowing simultaneous data transfer across channels. This is ideal for users working with large datasets, as it significantly accelerates processing times.

On the other hand, the RAM-SM800UT-E is designed for versatility, accommodating a broader range of devices, from ultrabooks to gaming laptops. Its emphasis on thermal management ensures reliability during extended usage. Coupled with error-correcting code (ECC) technology, it provides enhanced data integrity, making it suitable for mission-critical applications.

Lastly, the RAM-SM560BT-E is geared towards users who value balance between performance and cost. It features a robust construction and is compatible with a variety of motherboards. This makes it an excellent choice for upgrades in systems that require reliable performance without extensive investment.

In summary, Toshiba's RAM lineup, featuring the RAM-SM560AT-E, RAM-SM560UT-E, RAM-SM800KRT-E, RAM-SM800UT-E, and RAM-SM560BT-E, showcases a diverse array of memory solutions. Each model is built with cutting-edge technology, meeting the diverse demands of users ranging from casual home users to high-power gaming enthusiasts. With high capacity options, advanced data handling features, and energy-efficient designs, Toshiba continues to be at the forefront of memory technology.