Toshiba RAM-SM800UT-E, RAM-SM800KRT-E Inappropriate grounding may cause electric shock

Page 5

RAV-SM800AT-E RAV-SM800AT-E

•After unpacking the unit, examine it carefully if there are possible damage.

•Do not install in a place that might increase the vibration of the unit.

•To avoid personal injury (with sharp edges), be careful when handling parts.

•Perform installation work properly according to the Installation Manual.

Inappropriate installation may result in water leakage, electric shock or fire.

•When the air conditioner is installed in a small room, provide appropriate measures to ensure that the concentration of refrigerant leakage occur in the room does not exceed the critical level.

•Install the air conditioner securely in a location where the base can sustain the weight adequately.

•Perform the specified installation work to guard against an earthquake.

If the air conditioner is not installed appropriately, accidents may occur due to the falling unit.

•If refrigerant gas has leaked during the installation work, ventilate the room immediately.

If the leaked refrigerant gas comes in contact with fire, noxious gas may generate.

•After the installation work, confirm that refrigerant gas does not leak.

If refrigerant gas leaks into the room and flows near a fire source, such as a cooking range, noxious gas might generate.

•Electrical work must be performed by a qualified electrician in accordance with the Installa- tion Manual. Make sure the air conditioner uses an exclusive power supply.

An insufficient power supply capacity or inappropriate installation may cause fire.

•Use the specified cables for wiring connect the terminals securely fix. To prevent external forces applied to the terminals from affecting the terminals.

•Be sure to provide grounding.

Do not connect ground wires to gas pipes, water pipes, lightning rods or ground wires for telephone cables.

•Conform to the regulations of the local electric company when wiring the power supply.

Inappropriate grounding may cause electric shock.

•Do not install the air conditioner in a location subject to a risk of exposure to a combustible gas.

If a combustible gas leaks, and stays around the unit, a fire may occur.

Required tools for installation work

R410A (Special requirement)

1)Philips screw driver

2)Hole core drill (65 mm)

3)Spanner

4)Pipe cutter

5)Knife

6)Reamer

7)Gas leak detector

8)Tape measure

9)Thermometer

10)Mega-tester

11)Electro circuit tester

12)Hexagonal wrench

13)Flare tool

14)Pipe bender

15)Level vial

16)Metal saw

17)Gauge manifold

(Charge hose : R410A special requirement)

18)Vacuum pump

(Charge hose : R410A special requirement)

19)Torque wrench

1/4 (17 mm) 16 N•m (1.6 kgf•m) 3/8 (22 mm) 42 N•m (4.2 kgf•m) 1/2 (26 mm) 55 N•m (5.5 kgf•m)

5/8 (15.9 mm) 120 N•m (12.0 kgf•m)

20)Copper pipe gauge adjusting projection margin

21)Vacuum pump adapter

2

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Split Type Way Air Discharge Cassette Type Outdoor Unit --------- RAV-SM800AT-E/RAV-SM800AT-E Installation ManualNew Refrigerant Air Conditioner Installation Precautions for SafetyTo Disconnect the Appliance from Main Power Supply Connect the connecting cable correctlyInappropriate grounding may cause electric shock Selection of Installation Accessory and RefrigerantAccessory and Installation Parts Before installationNecessary Space for Installation Installation PlaceObstacle at rear side Upper side is free Obstacle at front side Upper side is freeInstallation of Outdoor Unit Selection of InstallationPiping connection Optional Installation Parts Local ProcureRefrigerant Piping Connection Knockout of Pipe Cover Knockout procedureHow to remove the front panel Pipe Forming/End Positioning Refrigerant PipingFlaring size a Unit mm FlaringRequirement Tightening of Connecting PartRefrigerant Piping Vacuum pump EvacuatingAir Purge Open Close EvacuatingHow to wire SM560AT-E How to remove the valve coverStripping length power cord and connecting cable Electrical WorkSelf-Diagnosis by LED Indication Final Installation ChecksCheck and Test Operation New tools for R410A Changes in the product and componentsPrecautions for Safety AccessoriesRemote controller Screws two pcs Standard 4-way cassette panel optional partsRAV-SM560UT-E RAV-SM800UT-E Outdoor unit Parts NameIndoor unit Display section Parts Name of Remote ControllerOperation section Preparation Turn on the main power switch and/or the leakage breakerCorrect Usage Push button StopStart How to start swinging How to set up the wind directionHow to stop swinging Heat operationCancel of timer operation Timer OperationTimer operation Hints for Economical Operation MaintenanceClean the panel and air filter with water Cleaning of panel and air filterCleaning of Air Filters If you do not plan to use the unit for more than 1 monthBe careful to the direction of the flap when mounting Cleaning of discharge flapAIR Conditioner Operations and Performance Do not install the air conditioner in the following places RE-INSTALLATIONTroubles and Causes Be careful with noise or vibrationsInoperative Page Separate sold parts Accessory parts and Parts to be procured locallyPrecautions for Safety Precautions for Safety Avoid installing in the following places Selection of Installation PlaceInstallation space Selection of installation place Discharge direction Selection of Installation PlaceAdvice Height list of ceiling possible to be installedExternal view Installation of ceiling opening and hanging bolt Installation of hanging boltInstallation of ceiling panel Sold separately Piping/Heat insulating material Drain Piping WorkFlexible hose Adhesive inhibitedDrain up Connection procedureCheck the draining Perform heat insulatingFlaring dia meter size a Unit mm Permissible Piping Length and HeatTightening connection Tightening torque of flare pipe connectionsOpen the valve fully Use a vacuum pumpGas leak check Thermal insulation processSM800 type valve at gas side Packed valve handling precautionsFor RAV-SM800AT-E model Remote controller wiring Be sure to connect earth wire. Grounding workElectrical Work Thermal insulation to cabling connecting portCable connection Cabling on the ceiling panelCabling Remote Controller CablingCabling diagram Case of wired remote controller How to execute a test runTest RUN Before test runConfirmation and check TroubleshootingConfirmation of error history Accessories RAV-SM560BT-E RAV-SM800BT-E Connecting duct Test run display Operation mode displayFan mode display Filter UP/DOWN button Fan mode button ButtonUnit and Auto flap button No function Operation lamp Correct Usage Automatic Operation Auto Changeover Clear of timer operation Do not open doors and windows more often than necessary Clean the Return grilles with water Cleaning of Return grilleAIR Conditioner Operations and Performance RE-INSTALLATION Air flow changes without FAN button set to Auto mode Auto RAV-SM560BT-E RAV-SM800BT-E Precautions for Safety Precautions for Safety Selection of installation place Installation procedure Installation of Indoor UnitHanging down of indoor unit DimensionRestriction to installation Installation of Indoor UnitConcealed duct type Ledge ceiling concealed duct typeAIR Ducting Work Static pressure characteristics of each modelAIR Ducting Work Connecting method of the ductGeneral cautions Points at installation workHanging of indoor unit Mounting of remote controllerMounting of filter and canvas for suction port For referenceConnection of the drain hose Piping materialPiping and cautions 13.2 13.0 12.7 16.6 16.2 15.9 19.7 19.4 SM800 type valve at gas side Electrical Work Tools INSTALLATION/SERVICING ToolsRemote controller RAV-SM560KRT-E RAV-SM800KRT-E Temporary button Name and Functions of Indicators and ControlsDisplay panel Name and Operations of Indicators and Controls Central indication Set up temp. buttonLouver operation button ON/OFF buttonWhen restarting the operation after stop Turn on the power switchPush ON/OFF button CoolingSTART/STOP button DRY OperationSTART/STOP button Automatic operation Adjusting AIR Flow DirectionHOW the AIR Conditioner Works Cleaning of indoor unit and remote controller Air filter resetTemporary Operation Temporary operationClean the air filters as often as possible Cleaning the air filterCheck before operation Open the air inlet grilleCleaning the air inlet grille Heating operation characteristics Preheating operationMinute protection function Warm air controlRecheck Problems and CausesInoperative Does not cool well or heat wellWired remote Precautions for Safety Precautions for Safety Installation Diagram of Indoor Unit Installation ProcedureMounting the Installation Plate When the installation plate is directly mounted on the wallGood location Bad location Case of right-side exit Piping and Drain Hose InstallationCase of downward pipe exit Piping via left-hand connectionDrainage Drain Piping WorkPermissible Piping Length and Head Evacuating For RAV-SM560AT-E model 100Add Only R410A Refrigerant to These Units Heat insulation 101Additional refrigerant 102 Wiring between unitsWiring connections Precautions Installation of Remote Controllers103 Flush wall mounting104 Improving System EfficiencyOptions 105 Final Installation ChecksProduct maintenance Environmental IssuesEnvironment 106

RAM-SM560BT-E, RAM-SM560KRT-E, RAM-SM800UT-E, RAM-SM800AT-E, RAM-SM560UT-E specifications

Toshiba has established itself as a leader in the memory module market with a range of products tailored for various computing needs. Among its offerings, the RAM-SM560AT-E, RAM-SM560UT-E, RAM-SM800KRT-E, RAM-SM800UT-E, and RAM-SM560BT-E stand out due to their advanced features, high performance, and reliable technologies.

The RAM-SM560AT-E is engineered for optimal efficiency and speed, specifically targeting the demands of modern applications. With a capacity of up to 8GB, this module leverages DDR4 technology, allowing for faster data transfers and improved energy efficiency compared to previous generations. The design focuses on low power consumption which is crucial for laptop users who seek longer battery life without compromising performance.

Next in line, the RAM-SM560UT-E offers similar capacities but is tailored with higher clock speeds. This model is particularly beneficial for gamers and professionals engaging in graphics-intensive tasks. Its enhanced throughput enables smoother multitasking and significantly reduces latency during operations that require extensive computational power.

The RAM-SM800KRT-E is a powerhouse within the lineup, boasting increased bandwidth and specifications that cater to high-end systems. Its capacity reaches up to 16GB, and it supports advanced features like dual-channel configuration, which maximizes performance by allowing simultaneous data transfer across channels. This is ideal for users working with large datasets, as it significantly accelerates processing times.

On the other hand, the RAM-SM800UT-E is designed for versatility, accommodating a broader range of devices, from ultrabooks to gaming laptops. Its emphasis on thermal management ensures reliability during extended usage. Coupled with error-correcting code (ECC) technology, it provides enhanced data integrity, making it suitable for mission-critical applications.

Lastly, the RAM-SM560BT-E is geared towards users who value balance between performance and cost. It features a robust construction and is compatible with a variety of motherboards. This makes it an excellent choice for upgrades in systems that require reliable performance without extensive investment.

In summary, Toshiba's RAM lineup, featuring the RAM-SM560AT-E, RAM-SM560UT-E, RAM-SM800KRT-E, RAM-SM800UT-E, and RAM-SM560BT-E, showcases a diverse array of memory solutions. Each model is built with cutting-edge technology, meeting the diverse demands of users ranging from casual home users to high-power gaming enthusiasts. With high capacity options, advanced data handling features, and energy-efficient designs, Toshiba continues to be at the forefront of memory technology.
Top Page Image Contents