HP D6028-90004 manual Manufacturer’s Name

Appendix H			Software License, Warranty, Regulatory and Support
			DECLARATION OF CONFORMITY
			per ISO/IEC Guide 22 and EN 45014
	Manufacturer’s Name:		Hewlett-Packard Company
	Manufacturer’s Address:		5301 Stevens Creek Blvd.
			Santa Clara, CA 95052 USA
	declares, that the product
		Product Name:	HP TopTools Remote Control Card
		Model(s):	D6028A
		Product Options:	ALL
	conforms to the following Product Specifications:
	Safety:	IEC 950-1:1991 + A1: 1992 / EN 60950-1:1992 + A1: 1993
	EMC:	EN 55022: 1994 / CISPR 22, Class B
		EN 50082-1:1997 - Generic Immunity
			IEC 801-2:1991, 4 kV CD, 8 kV AD
			IEC 801-3:1992, Radiated Immunity: 3V/m
			IEC 801-4:1988, Fast Transients: 0.5 kV, 1 kV

Supplementary Information:

1)During the measurements against EN55022, the I/O ports were terminated with their nominal impedance, the RS 232 and LAN connection was terminated with the HP cable.

2)When the product is connected to other devices, the user must ensure that the connecting cables and the other devices are adequately shielded to prevent radiation.

3)The product complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

-This device may not cause harmful interference, and

-This device must accept any interference received, including interference that may cause undesired operation.

The product herewith complies with the requirements of the following directives and carries the CE marking accordingly:

-EMC Directive 89/336/EEC

-Low Voltage Directive 73/23/EEC

Santa Clara, July 2, 1998

Nigel Marrion/Quality Manager

North American Contact:

Hewlett-Packard Company Product Regulations Manager 3000 Hanover Street

Palo Alto, CA 94304 650-857-1501

European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH,

Department HQ-TRE Herrenberger Straße 130 D-71034 Böblingen (FAX: + 49-7031-143143)

102