Chapter 6 | Setting Up NT Graphics Console Redirection Using pcANYWHERE32 |
4.Run the pcANYWHERE32 setup program. From the Windows Start menu, click "Run" and browse to the setup program’s location:
x:\util\pca32\us\disk1\setup.exe
where x: is the letter of your
5.When setup is complete, you are prompted to restart. Remove the HP NetServer Navigator CD and click OK.
Configuring pcANYWHERE32 Server Software
After you have completed pcANYWHERE32 installation at the server, you need to configure the software to function as a host for graphics console redirection. Once configured and enabled, the HP NetServer waits on a direct serial connection via the HP TopTools Remote Control card’s serial port (COM4 by default).
To configure pcANYWHERE32 on the server:
1.Run pcANYWHERE32. Either
2.At the pcANYWHERE32 main screen, click the Be a Host PC action button.
Menu bar
Action button bar
Figure 6-2. pcANYWHERE32 Server-Side Toolbar
43