HP D6028-90004 manual Event Codes, Description System Power

A Event Codes

The table below describes the event codes that can be listed in the event log and optionally directed to specified users via e-mail or pager. When the HP TopTools Remote Control card sends notification about a server event, it includes the server identifying number and a five-digit code identifying the event. (If you use email or a TAP pager, you will receive the server name and some descriptive text as well.)

In the Severity column, an asterisk (*) indicates that the severity rating depends on particular data for the event. The final column indicates which NOS agents need to be loaded on the HP NetServer before the particular event is generated. Refer to the HP NetServer SNMP agents documentation (viewable in HP Information Assistant on the NetServer Documentation CD) for agent installation and configuration instructions.

NOTE	It’s a good idea to copy appropriate sections of this table and
	keep it with the pager you use to receive notifications. A
	regularly updated list of HP supported event codes is available
	via the WWW at http://www.hp.com/go/netserver.

Notification and log messages are limited to a length of 40 characters.

Event Code

00201

00202

00203

00204

00206

00207

00210

00211

00800

00801

00900

Severity

*

*

*

*

*

Warning

*

*

*

Warning

Informational

Description

System Power

Voltage +5V Threshold

Voltage -5V Threshold

Voltage +12V Threshold

Voltage -12V Threshold

Voltage +3.3V Threshold

SCSI Terminator Voltage Limit Exceeded

Primary CPU Voltage Threshold

Secondary CPU Voltage Threshold

Redundant Power Supply Removed or Inserted

Redundant Power Supply Aux or DC Power Failure

Redundant Power Supply Unit Redundancy Gained

Agent

None

None

None

None

None

None

None

None

None

None

None

57