HP D6028-90004 manual

5Logging In and Using the HP TopTools Remote Control Web Interface

After you’ve installed, cabled, and configured the HP TopTools Remote Control card using the card’s BIOS setup program, you are ready to set options for the Remote Control card using HP TopTools Remote Control’s management software.

Using your web browser you can remotely set all card options including:

∙Setting up an administrator list (up to 16) for system access and notification

∙Configuring event management operations, including the enabling of paging and e-mail notification

∙Configuring serial communications for external modem

∙Configuring LAN access

CAUTION Configuring LAN access during a remote connection is dangerous. Changing your LAN access settings while logged on could terminate your connection.

∙Viewing a log of server events and PCI utilization

∙Viewing current measurement sensors

∙Viewing server screens

∙Running diagnostics on the server

∙Performing remote firmware or BIOS updates

∙Remotely power on, power off, power cycle, or reset the server

35