HP Workgroup System AWSXCIG-1A manual Table of Contents

Table of Contents
About This Document		9
Intended Audience		9
Document Organization		9
Typographic Conventions		9
Documentation Updates and Release Notes		10
HP Encourages Your Comments		10
1 HP Workgroup System Overview		11
1.1 HP Workgroup System Views		11
2 Hardware Prerequisites		13
2.1	Hardware Preinstallation Checklist	13
2.2	Firmware Requirements	13
3 Hardware Setup		15
3.1	Unpack the Enclosure	15
3.2	Installing and Starting Up the Hardware	17
	3.2.1 Setting IP Addresses	17
	3.2.2 Setting Boot Order	19
	3.2.3 Setting Up iLO	19
	3.2.4 Enabling Telnet Access	20
	3.2.5 Setting the Power Regulator	20
	3.2.6 Configuring Smart Array	20
4 Software Prerequisites		23
4.1	Software Preinstallation Checklist	23
4.2 Downloading XC Software Patches		24
4.3	Copying the XC.lic File to Your Laptop	24
4.4 Associating the Enclosure DVD to the Head Node		25
5 XC Software Installation		27
5.1	Booting the DVD	27
5.2 Running the cluster_prep Command		28
5.3	Installing Patches from Your Laptop	29
5.4	Putting the License Key File in the Correct Location	30
5.5	Running the discover Command	30
5.6 Running the cluster_config Command		31
5.7	Running the startsys Command	34
5.8	Configuring the SNMP Trap	34
5.9	LSF Post-Configuration Tasks	35
5.10 Verifying LSF-HPC with SLURM		35
5.11 Running the OVP to Verify Software and Hardware Components		36
5.12 Nagios Web Interface		37
5.13 The nrg Command		37
5.14 Creating a Baseline Copy of the Database		38
5.15 Creating a Baseline Report of the System Configuration		38
5.16 Setting Up VLAN		39

Table of Contents 3