HP 1310 manual Print cartridge is defective

					quick start
on light	check	check print	explanation	what to do?
(green)	paper	cartridge				quick
	light	light
Light is on.	Light is	Light is off.	The paper tray is empty,	• Load paper, or remove the		start
	blinking.		the HP psc has a paper		paper jam.
			jam, or the paper size	• Change paper in paper
			setting and paper in paper		tray to correct size.
			tray are not the same.	• Change paper size on the
					computer software.
				Then press On/ Resume to
				continue.
Light is on.	Light is off.	Light is	• Print cartridge access	1	Remove the print
		blinking.	door might be open.		cartridges and make
			• Print cartridges might		sure the tape has been
					removed.
			be missing or not
			installed properly.	2	Re-insert the print
			• Tape might not have		cartridges and make
			been removed from the		sure they are properly
			print cartridges.		seated.
			• There might be a	3 Close the access door.
			problem with the print	If the light continues to blink,
			cartridge.	one of the print cartridges is
				defective. Do the following:
				1 Remove the black (or
					photo) print cartridge.

			2 Close the access door.
			If the light blinks, the tri-color
			print cartridge is defective
			and must be replaced. If the
			light does not blink, the black
			(or photo cartridge) is
			defective.
			For more information on this
			condition, click the HP psc
			status icon in the system tray
			on your computer (Windows
			only).
Light is on. Light is	Light is	The print carriage is	Open the print carriage
blinking.	blinking.	stalled.	access door and make sure
			the carriage is not
			obstructed.

user guide 5