load originals & paper
chapter 2
load envelopes
Use the print feature of your word processing software to print to envelopes with your HP PSC. Use envelopes for printing only; copying on to an envelope is not recommended. Do not use shiny or embossed envelopes, or envelopes that have clasps or windows. You can load the paper tray with one or multiple envelopes.
Note: Consult the help files in your word processing software for details on how to format text for printing on envelopes.
1Remove all paper from the paper tray.
2Slide an envelope into the tray, with the envelope flap up and to the left (print side down), until it stops. Do not force the envelope in too far.
3Adjust the
Do not overload the paper tray when loading multiple envelopes. Make sure the stack of envelopes is no higher than the top of the
load postcards, Hagaki cards, or 4 by 6 inch (10 by 15 cm) photo paper
The following is the procedure for loading postcards, Hagaki cards, or 4 by 6 inch (10 by 15 cm) photo paper.
1Remove all paper from the paper tray, and then slide a stack of cards into the tray until it stops. Insert the short edge of the card into the HP psc first. Make sure the print side faces down.
Note: If you are using photo paper with perforated tabs, load the photo paper so that the tabs face out towards you.
2Adjust the
Make sure the cards fit within the tray. Do not overload it. The stack should be no higher than the top of the
14 | hp psc 1310 series |