Parts/kits listed are now obsolete and are no longer serviceable through Bendix.
DISPLAY
Maintaining the Combiner Mirror
The combiner is a sensitive optical element and should be cleaned when it becomes dirty or filled with debris. Dirt and debris can affect the display performance.
1.Remove heavy dirt or grit with air.
2.Clean the combiner with a soft, damp cloth moistened with window cleaning solution. Shop rags and paper towels will scratch this optical surface.
NOTE: Do not use ammonia to clean any of the display components. It will remove
Replacing the Combiner Mirror
1.Locate the depression in the center of the combiner door. Refer to Figure 28.
Depression in Combiner | Combiner Mirror |
Door |
|
FIGURE 28 - REPLACEMENT COMBINER
2.Pry the old combiner out by inserting a small screwdriver or pocket knife into the depressions and pushing upward.
3.Snap the new combiner gently in place.
Maintaining the Fold Mirror
Remove heavy dirt or grit from the fold mirror with air. Clean the fold mirror with a soft, damp cloth moistened with window cleaning solution. Shop rags and paper towels will scratch this optical surface.
NOTE: Do not use ammonia to clean any of the display components. It will remove
Replacing the Fold Mirror
1.Locate one of the four depressions along the perimeter of the fold mirror. Refer to Figure 29.
Depressions
in Fold Mirror
FIGURE 29 - REPLACEMENT FOLD MIRROR
2.Pry the old fold mirror out by inserting a small screwdriver or pocket knife into one of the depressions and pushing upward.
3.Snap the new fold mirror gently into place.
16