Omega Speaker Systems iSE-TC Srtc, Srtf, Srhc, Srhf, Srdc, Srdf, SRA1, SRA2, Srb, Srys, Sryrst

4.5.1 HTTPget using Port 1000 (continued)
httpget -r -S “*SRTC\r” 192.168.1.200:2000
where:	are parameters needed for the command string
-r –S
*SRTC	is the command as the following:
*SRTC		Read the temperature in C (Channel 1)
*SRTF		Read the temperature in F (Channel 1)
*SRHC		Read temperature in C (Channel 2)
*SRHF		Read temperature in F (Channel 2)
*SRDC		Read the differential in C
*SRDF		Read the differential in F
*SRA1		Read temperature setpoints (Channel 1)
*SRA2		Read temperature setpoints (Channel 2)
*SRB		Read the temperature in C, (both Channel 1 and Channel 2)
*SRYS		Indicate AC or DC power and battery status
*SRYRST		Reset Power on iSE
*SR_XD1		Exclude alarm 1 (disable alarm 1 function)
*SR_XD2		Exclude alarm 2 (disable alarm 2 function)
*SR_XC1		Reset relay 1 latch condition
*SR_XC2		Reset relay 2 latch condition
*SR_XE1		Include alarm 1 (enable alarm 1 function)
*SR_XE2		Include alarm 2 (enable alarm 2 function)
*SR_XP1		Close relay 1 for < 200 mSec
*SR_XP2		Close relay 2 for < 200 mSec
*SR_XH1		Close relay 1
*SR_XH2		Close relay 2
*SR_XL1		Open relay 1
*SR_XL2		Open relay 2
*SRT2		Status of Contact 1 (Disable, Normal, Active)
*SRH2		Status of Contact 2 (Disable, Normal, Active)
*SRD2		Status of the Output associated with the Contacts (Active High,
		Active Low)
\r is the carriage return termination character
192.168.1.200		is an IP address

2000 is a socket port number

Response:

076.6 (in Deg.F 35)

36