Omega Speaker Systems iSE-TC manual Device Setting and Configuration Device setup requires

Page 46

4.8.3 Device Setting and Configuration Device setup requires:

• Server IP Address: for iSE device (for example 192.168.1.200).

• Socket Number: (1000 or 2000 depending on iSE settings).

• Bus Address/Device ID: interface address (1 to 199). Enter "0" for RS232 interface or for iSE.

• Reading Cmd: normally set to SRFT to obtain reading from the devices. If you want to change this setting, refer to list of commands in Section 4.5.

• Alarm Type: (High/Low, High value, or Low value).

• Info Message: text can be entered to describe the alarm condition.

• Email Interval: the time interval in which the email is sent.

• Monitor Interval: the interval or time resolution in which readings will be obtained from the device.

• Alarm Hold Time: the time delay of each subsequential alarm notification to be sent.

Alarm Editor

Device Info	(1 of 2)							OK
Server IP Address		192.168.1.200						OK
Server IP Address		192.168.1.200
Socket Number			1000				Cancel
Bus Address/Device ID			1					Help
Description				Dev 2
Src ID				Dev 2			Add	Del
Reading Cmd							Only Monitor Access
			zRdgA				Only Monitor Access
			zRdgA
			SRTF				to iServer device
Alarm Configuration							to iServer device
Alarm Configuration
Alarm Type	Alarm High			Info Message
Alarm High	73			Email Interval			0.05	hrs.
Alarm Low	0			Monitor Interval			0.5	min.
				Alarm Hold Time			0.0	min.

Figure 4.19 iSE Mail Notifier Device Setting

42

Image 46

Contents User’s Guide Page Dhcp DNS List of Figures ISE and iLD Big Display on the Ethernet NetworkFeatures Part Introduction Page ISE and iLD Big Display on the Ethernet Network Part 2 Hardware Wall MountingDIP Switches DIP Switch LocationParts of the iSE Unit Parts of iSE UnitDisassembly Instruction Opening the UnitCrossover Cable Wiring Relay and I/O Contact Wiring ConnectionsNetwork Communication Interfaces 1 10Base-T RJ-45 Pinout Running on Battery Power Battery and S5 Jumper LocationFlash Memory Format Data Record TestPart Network Configuration 3.1 Network ProtocolsEthernet MAC Address Subnet Mask DhcpDNS SectionPort Number Default IP AddressExample C\Telnet 192.168.1.200 Testing the Connection Part OperationsIConnect Software ISERVER Home Setting a New IP Address over the Network Access ControlPrompted for a password, as shown in Figure Setup and Operation Using the iSE WebLogin and Administrator Passwords Read Sensor Java Runtime Environment 1.4 Setup instructions Read SensorAccessing iSE units using the internet Java Runtime Environment 1.5 5.0 Setup instructionsDiagnostics Adjustable Chart Fla sh ArchiveRetrieving Data from Flash OptionDhcp can be enabled by setting the dip switch number #2 RTC is set, and recording is in progress Configuration#1 RTC is not set and Flash Card is empty #4 RTC is not set and the Flash Card is not emptyReal Time Clock Flash Recording SettingsRemote Access Tunneling MegaBytes Flash Card 22 Kbytes Used SpaceConfiguration/Device Setup Temperature 1 and TemperatureInput 2 Status Unlatch, Latch, Clear Latch, Chart SP Flash RecordingConfiguration Configuration Input Contact Closure Terminal ServerConfiguration Remote Access 12 Sensor Parameters Temperature Sensor ParametersTA71.34F TA72.48F TD-1.19F TA71.34FTA72.48FTD-1.19FTelnet Setup HTTPget ProgramHTTPget using Port Srhc SrtcSrtf SrhfArp -s 192.168.1.200 00-03-34-00-06-b6 HTTPget and ARP to setup Device IP AddressWhere 15 ARP Commands and Responses ARP ProtocolILog Software 16 iLog Software Logging DataInstallation Mail Notifier SoftwareEmail Setup OptionsDevice Setting and Configuration Device setup requires 19 iSE Mail Notifier Device SettingPart Specifications Sensor Specifications Thermocouple InputEnvironmental PowerInterfaces PackagingNetwork Interface Part Approvals Information CE Approval Measurement CategoryAppendix Aglossary Appendix BIP Address Or Dotted Notation Appendix CIP NetmaskAddress Class Mask Binary Value Mask Decimal Value Mask Dotted Notation Mask Binary Mask BitsDec Binary Appendix D Hex Ascii Chart Dec BinaryAscii Char No Parity No parityDec Hex Ctrl Key Ascii Control Codes Definition Appendix D Ascii Chart ContinuationChar Equiv Appendix E ILog Error Messages Error # Description Page Page WARRANTY/DISCLAIMER Shop on line at omega.com