High End Systems SHOWGUN user manual Menu Map, Level Option/Setting Description/Notes

CHAPTER 3

SHOWGUN® Menu System

Menu Map

Level 1	Level 2	Option/Setting	Description/Notes
DMX ADDRESS	SET DMX START	1-483	Selected value becomes the first DMX value
			in the range for that fixture on a DMX 512
MENU	CHANNEL: ###
			link.
	FACTORY DEFAULT	ON	Reverts fixture to default setting
	SETTINGS: ###	OFF	Indicates a factory default has changed
	PAN/TILT SWAP:	DISABLED	Restores default Pan and Tilt Motion
		ENABLED	Swaps the Pan and Tilt Motion
	PAN INVERT:	DISABLED	Restores default Pan motor direction
		ENABLED	Inverts Pan motor direction
	TILT INVERT:	DISABLED	Restores default Tilt motor direction
SET MENU
		ENABLED	Inverts Tilt motor direction
	DISPLAY LEVEL:	OFF	Display fully dimmed when menu is locked
		ON	Turns display on
		DISABLED	Disables lamp life tracking
	LAMP LIFE LIMIT:
		ENABLED	Tracks the time the lamp is on and sends a
			warning at 500hrs
	DATA LOSS	SHORT	Shutter closes 1 second after data loss
	TIMEOUT:	LONG	Shutter closes when fixture shuts down
FIXTURE MODE	CROSSLOAD	NO	Safe setting
			Uploads fixture software to all other
MENU	FIRMWARE:	YES
			SHOWGUN fixtures on the link
	HOME FIXTURE:	ALL	Homes all fixture functions
	LAMP STATE:	OFF	Indicates or turns lamp off
		ON	Indicates or turns lamp on
	COPY BOOT:	NO	Does nothing when selected
		YES	Copies boot code to fixture
	DISPLAY TEST	OFF	Default Safe setting
TEST MENU		ON	Performs Display test
	SETUP MOTORS	OFF	Default Safe setting
		ON	Runs motor setup routine
	ENCODER TEST	OFF	Leaves encoders enabled
		ON	Disables encoders
	CAL RGB LEDS	OFF	Default Safe setting
		ON	Calibrates the RGB LEDs
	CODE MENU		For factory use only
	SENSOR STATUS	PAN	Displays absolute position of Pan
INFOMATION	MENU	TILT	Displays absolute position of Tilt
MENU
	UNIQUE NUMBER		Displays fixture’s unique 10-character
	##########		number

16 SHOWGUN® User Manual