High End Systems SHOWGUN user manual Module Version, Display Errors, Next DMX Channel

Page 40

CHAPTER 3

SHOWGUN® Menu System

Module Version

This option displays the current hardware and software versions for the following components:

Pan

Tilt

Shutter/Cyan

Magenta/Yellow

Edge/Gobo/Rotate

Focus/Zoom/Iris

RGB LED Control

Display Errors

This menu option displays current errors in a descriptive 32-character text field.

To DISPLAY ERRORS:

1.Press the Menu button to unlock the menu system or to move back up the system to the top level menus.

2.Use the left and right arrows on the Center button to scroll to the INFORMATION MENU and press the Enter button to select.

3.Use the left and right arrows on the Center button to scroll to the DISPLAY ERRORS menu option and press the Enter button to select.

4.Use the up and down arrows on the Center button to view the list of current errors.

Next DMX Channel

Use this option to view the next available DMX Start channel on the link following this fixture and is based on the fixture’s specific configuration. The value displayed uses the formula (current Start channel + 30 +1).

28

SHOWGUN® User Manual

Image 40
Contents High End Systems, Inc , All Rights Reserved Contacting High End Systems AmericasDeclaration of Conformity According to ISO/IEC Guide 22 and EN45104Important Safety Information Product Modification WarningFCC Information Safety Symbols Injury and/or damage to equipmentWarranty Information Limited WarrantyReturning an Item Under Warranty for Repair FreightVii Viii Table of Contents Showgun Menu System Fixture Programming Maintenance and Troubleshooting Chapter Product Overview Showgun FeaturesFixture Operation ConstructionRelated Products and Accessories Part Description Part NumberSpecifications MechanicalPower OperationalEnvironmental ElectricalCable and Connector Specifications Lamp SpecificationsLithoPattern Specifications Installing a Power Cord Cap Chapter Setup and ConfigurationUnpacking the Fixture Mounting the Fixture Installing a Line Cord Cap U.K. OnlyVatic Fitter Heads Information Danmark Mounting the Fixture Upright Truss MountingCable Connectors Linking Showgun FixturesConnecting to the Link Powering On the FixtureFixture Homing Setting the DMX Start Channel Shutting Down the FixtureNavigating the Menu System Chapter Showgun Menu SystemShowgun Display Display in Menu Locked Mode Error Message DisplayNavigational Basics Fixture Software Version DMX Start ChannelUnlocking the Menu System Exiting the Menu SystemLevel Option/Setting Description/Notes Menu MapLevel Following sensorsSetting DMX Start Channel Menu System OptionsDMX Address Menu Determining DMX Start Channel AssignmentChannel Location Fixture Channels Start FixtureType Used per Channel Link Fixture Set Parameters Menu Factory Default SettingsPan/Tilt Swap Pan Invert Tilt InvertData Loss Timeout Lamp Life LimitFixture Mode Menu Test Options MenuCrossloading Fixture Software Homing the FixtureCopying the Boot Code Display Test Motor SetupEncoder Disable Code Menu Lamp StateInformation Menu Sensor Status MenuUnique Number DMX Values MenuTemperatures Menu Fixture HoursFixture Hours Reset Lamp HR/Strike ResetLamp Hours Lamp StrikesModule Version Display ErrorsNext DMX Channel Chapter Fixture Programming DMX Programming OverviewFull Speed verses MSpeed Control DMX Programming OptionsPan and Tilt Showgun DMX ParametersChannel Function Color Mixing CMY ColorTri Color Color Function DescriptionLED Tracking System RGB ColorLED Tracking Functions LED Tracking System DimmingShutter and Lamp Effects Shutter/Lamp Function Shutter ChannelMSpeed Motor Speed Zoom and FocusMacros Control Settings Control Setting DescriptionChapter Chapter Maintenance and Troubleshooting Fixture Component ReplacementFuse Fuse Location and Access Symptom of Failure Replacing FusesReplacing the Lamp Replacement FusesFuse Fuse Type and Rating Manufacturer HES Part Number Chapter Phase Boards Driver BoardsPhase Board Pan BoardReplacing Lithopatterns Microfresnel Lens Cleaning the Showgun FixtureAchromatic Lens Reflector FilterAccessing the Bulk Heads Production HomingIris and Gobo Bulk Head Soft Edge Flag Bulk HeadConnect dimmer flag motors directly to 2-phase driver Flag Calibration ExampleAdjustment Calibrate the flagsChapter Power Supply TroubleshootingPower Board Connection Functions Supply Powered State Problem? Description Board LED StatesAppendix a MSpeed Conversion Table Dec Appendix B Important Safety Information Appendix B Important Safety Information Appendice C Importantes Informations Sur La Sécurité Anhang C Wichtige Hinweise Für Ihre Sicherheit Warnung Zum Schutz Vor BrandgefahrWarnung Zum Schutz Gegen Gefährliche Körperströme Warnung Zum Schutz Vor VerletzungenApéndice C Información Importante De Seguridad Advertencia Para Protección Continua Contra IncendiosAppendice C Importanti Informazioni Di Sicurezza Avvertenza Per Prevenire IncendiAvvertenza Per Prevenire Le Scosse Elettriche Avvertenza Per Non Ferire Ad Altre PersoneVigtig Sikkerhedsinformation Appendix B Important Safety Information