High End Systems SHOWGUN FCC Information Safety Symbols, Injury and/or damage to equipment

Page 5

FCC Information

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

Safety Symbols

The following international caution and warning symbols appear in margins throughout this manual to highlight messages.

 

This symbol appears adjacent to Caution messages.

 

Not heeding these messages could result in personal

 

injury and/or damage to equipment.

 

This symbol appears adjacent to high voltage warning

 

messages. Not heeding these messages could result in

 

serious personal injury.

 

This symbol indicates the minimum focus distance

 

from a combustible object.

 

This symbol cautions against mounting the fixture on

 

or near a flammable surface.

 

This symbol indicates an explosion hazard.

UV

This symbol cautions against an Ultraviolet Radiation

hazard.

 

 

This symbol indicates that eye protection should be

 

worn to prevent potential injury.

 

This symbol warns of a fire hazard.

 

This symbol indicates that, while operating, equipment

 

surfaces may reach very high temperatures. Allow the

 

fixture to cool before handling.

SHOWGUN® User Manual

v

Image 5
Contents High End Systems, Inc , All Rights Reserved Americas Contacting High End SystemsAccording to ISO/IEC Guide 22 and EN45104 Declaration of ConformityProduct Modification Warning Important Safety InformationInjury and/or damage to equipment FCC Information Safety SymbolsLimited Warranty Warranty InformationReturning an Item Under Warranty for Repair FreightVii Viii Table of Contents Showgun Menu System Fixture Programming Maintenance and Troubleshooting Fixture Showgun FeaturesChapter Product Overview Construction OperationPart Description Part Number Related Products and AccessoriesMechanical SpecificationsOperational PowerEnvironmental ElectricalLithoPattern Specifications Lamp SpecificationsCable and Connector Specifications Unpacking the Fixture Chapter Setup and ConfigurationInstalling a Power Cord Cap Vatic Fitter Heads Information Danmark Installing a Line Cord Cap U.K. OnlyMounting the Fixture Truss Mounting Mounting the Fixture UprightLinking Showgun Fixtures Cable ConnectorsFixture Homing Powering On the FixtureConnecting to the Link Shutting Down the Fixture Setting the DMX Start ChannelShowgun Display Chapter Showgun Menu SystemNavigating the Menu System Error Message Display Display in Menu Locked ModeNavigational Basics Fixture Software Version DMX Start ChannelExiting the Menu System Unlocking the Menu SystemMenu Map Level Option/Setting Description/NotesFollowing sensors LevelMenu System Options Setting DMX Start ChannelDMX Address Menu Determining DMX Start Channel AssignmentType Used per Channel Link Fixture FixtureChannel Location Fixture Channels Start Pan/Tilt Swap Factory Default SettingsSet Parameters Menu Tilt Invert Pan InvertLamp Life Limit Data Loss TimeoutTest Options Menu Fixture Mode MenuCrossloading Fixture Software Homing the FixtureDisplay Test Motor Setup Copying the Boot CodeEncoder Disable Code Menu Lamp StateSensor Status Menu Information MenuUnique Number DMX Values MenuFixture Hours Temperatures MenuLamp HR/Strike Reset Fixture Hours ResetLamp Hours Lamp StrikesNext DMX Channel Display ErrorsModule Version DMX Programming Overview Chapter Fixture ProgrammingFull Speed verses MSpeed Control DMX Programming OptionsChannel Function Showgun DMX ParametersPan and Tilt CMY Color Color MixingTri Color Color Function DescriptionRGB Color LED Tracking SystemLED Tracking Functions LED Tracking System DimmingShutter/Lamp Function Shutter Channel Shutter and Lamp EffectsMacros Zoom and FocusMSpeed Motor Speed Control Setting Description Control SettingsChapter Fixture Component Replacement Chapter Maintenance and TroubleshootingFuse Fuse Location and Access Symptom of Failure Replacing FusesFuse Fuse Type and Rating Manufacturer HES Part Number Replacement FusesReplacing the Lamp Chapter Driver Boards Phase BoardsPan Board Phase BoardReplacing Lithopatterns Achromatic Lens Cleaning the Showgun FixtureMicrofresnel Lens Filter ReflectorProduction Homing Accessing the Bulk HeadsIris and Gobo Bulk Head Soft Edge Flag Bulk HeadFlag Calibration Example Connect dimmer flag motors directly to 2-phase driverCalibrate the flags AdjustmentChapter Power Board Connection Functions Supply Powered TroubleshootingPower Supply Board LED States State Problem? DescriptionAppendix a MSpeed Conversion Table Dec Appendix B Important Safety Information Appendix B Important Safety Information Appendice C Importantes Informations Sur La Sécurité Warnung Zum Schutz Vor Brandgefahr Anhang C Wichtige Hinweise Für Ihre SicherheitWarnung Zum Schutz Gegen Gefährliche Körperströme Warnung Zum Schutz Vor VerletzungenAdvertencia Para Protección Continua Contra Incendios Apéndice C Información Importante De SeguridadAvvertenza Per Prevenire Incendi Appendice C Importanti Informazioni Di SicurezzaAvvertenza Per Prevenire Le Scosse Elettriche Avvertenza Per Non Ferire Ad Altre PersoneVigtig Sikkerhedsinformation Appendix B Important Safety Information