Safety Precautions

The purpose of this information is to ensure proper use of this product to prevent danger or damage to property. Please be sure to observe all precautions.

*The precautions are divided into "Warnings" and "Cautions" as distinguished below:

Warning: Ignoring this warning may result in death or serious injury.

Caution: Ignoring this caution may result in injury or damage to property.



	Warning instructions alert you to			Caution instructions alert you to the
	a potential risk of death			potential risk of injury or
	or serious injury.			damage to property.

Warning

1.Be sure to use only the supplied adapter.

(Using an adapter other than the one supplied may cause fire, electrical shock, or damage to the product.)

2.When connecting the power supply and signal wires, check the external connection terminals before connecting them. Connect the alarm signal wires to the alarm terminals, the AC adapter to the AC power input receptacle, and the DC adapter to the DC power input, making sure that the correct polarity is observed.

(Connecting the power supply incorrectly may cause fire, electrical shock, or damage to the product.)

3.Do not connect multiple cameras to a single adapter.

(Exceeding the capacity may cause abnormal heat generation or fire.) (A falling camera may cause personal injury.)

4.Securely plug the power cord into the power receptacle. (Insecure connection may cause fire.)

5.When installing the camera on a wall or ceiling, fasten it securely and firmly. (A falling camera may cause personal injury.)

6.Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Doing so may cause personal injury due to fire, electrical shock, or falling objects.)

7.Do not install the unit in humid, dusty, or sooty locations. (Doing so may cause fire or electrical shock.)

8.If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. (Continued use in such a condition may cause fire or electrical shock.)

9.If this product fails to operate normally, contact the store of purchase or your nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.)

10.When cleaning, do not spray water directly onto parts of the product. (Doing so may cause fire or electrical shock.)

Wipe the surface with a dry cloth. Never use detergents or chemical cleaners on the product, as this may result in discoloration of surface or cause damage to the finish.

Caution

1.Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibration or magnetic interference.

2.Do not install in a location subject to high temperature (over 122°F), low temperature (below 14°F), or high humidity.

(Doing so may cause fire or electrical shock.)

3.Avoid a location which is exposed to direct sunlight, or near heat sources such as heaters or radiators.

(Neglecting to do so may result in a risk of fire.)

4.If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

5.Install in a well-ventilated location.

6.Remove the power plug from the outlet when there is a lightning storm. (Neglecting to do so may cause fire or damage to the product.)