Samsung SCC-643P manual Other SET

6. OTHER SET

AC(Auto Calibration)

This function turns on or off Auto Calibration. SCC-C643(P) has the Auto Calibration function to improve the precision of LENS and PAN/TILT motor. You may set to OFF/6HOUR/12HOUR/18HOUR/24HOUR. Without user’s key input for the time designated by the user, A.C. will

PRIVACY ZONE

Pan/Tilt position and the size of Masking area can be set for up to 8 privacy zones. When shooting the areas where privacy zones are set, the relevant areas will be concealed from view to protect privacy.

Privacy Zones can be set as follows:

appear on the screen while initializing LENS and PAN/TILT.

P.P/T(Proportional Pan/Tilt)

This function controls the PAN/TILT speed to the ZOOM magnification ratio during the manual operation of PAN/TILT. If you set PROPORTIONAL P/T to ON, the PAN/TILT speed will increase in the ZOOM WIDE mode and decrease in the ZOOM TELE mode even in the same manual operation.

(OTHER SET)
AC		OFF
P.P/T		ON
HOME RETURN		12HOUR
HOME POSITION		0
PRIVACY ZONE	...
CAM RESET		...
LANGUAGE		ENGLISH
EXIT		QUIT

➜

[Enter]

KEY

(PRIVACY ZONE MAP)

1*	2	3	4
5	6	7	8

RET

➜

[Enter]

KEY

E

HOME RETURN

When there is no KEY input or other movement for a certain time, the camera moves to the HOME location automatically. The HOME location can be assigned from the HOME POSITION menu.

Select PRIVACY ZONE and press the [Enter] key. The PRIVACY ZONE Map appears and an asterisk "*" is placed next to the numbers set.

Use the [up, down, left, right] keys to select a number you want to set, and then press the [Enter] key.

SET UP TIME FOR HOME RETURN:

OFF: HOME RETURN function cancellation

OFF ➞ 1 MIN ➞ 2 MIN ➞ 3 MIN ~ 60MIN ➞ 2HOUR ~12HOUR

PRIVACY ZONE SET 1

SET PAN/TILT ...

SET AREA	...
SET LEVEL	1
EXIT	QUIT

➜

[Enter] KEY

Entering the

PAN/TILT

Setup Mode

PRIVACY ZONE SET 1

SET PAN/TILT	SET
SET AREA	...
SET LEVEL	1
EXIT	QUIT

➜

[Enter] KEY

The PAN/TILT

Setup is

Complete.

HOME POSITION

You can select the HOME POSITION from the preset positions numbered between 0 and 127.

AUTO FLIP

When operating the Tilt to the 90° limit using the Joystick, the camera PAN automatically revolves 180° showing the opposite area of the Tilt area. It gives the effect of extending the Tilt operating area 180°.

When the above screen appears, press the [Enter] key while the SET PAN/TILT is selected to set the Pan/Tilt position. With OSD showing "SET", use the Joystick move the Masking area to the center.

After setting the position, press the [Enter] key again to exit the PAN/TILT position setup.

3-22 3-23