Samsung VP-MX10A/AND, VP-MX10H/XEF manual 维护和其他信息, Maintenance, Cleaning the memory camcorder, 中文79

maintenance & additional information

MAINTENANCE

Your memory camcorder is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfi ll any warranty obligations and allow you to enjoy this product for many years.

✪For safekeeping of the memory camcorder, turn off the memory camcorder.

-Remove the battery pack and AC power adaptor. ➥page 13

-Remove the memory card. ➥page 32

Cautions on Storing

•Do not leave the memory camcorder in a place where the temperature is very high for a long period of time:

The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave the memory camcorder in such a place, it could malfunction or the case could be damaged. Do not expose the memory camcorder to direct sunlight or place it near a heater.

•Do not store the memory camcorder in a place where the humidity is high or in a dusty place:

Dust entering the memory camcorder could cause malfunctions. If humidity is high, the lens could become moldy, and the memory camcorder could become inoperative. It is recommended that you put the memory camcorder in a box together with a desiccant when storing it in a closet, etc.

•Do not store the memory camcorder in a place subject to strong magnetism or intense vibrations:

This could cause malfunctions.

•Detach the battery pack from the memory camcorder and store it in a cool place:

Leaving the battery pack attached or storing it at high temperature could shorten its life.

Cleaning the memory camcorder

✪Before cleaning, turn off the memory camcorder and remove the battery pack and AC power adapter.

•To clean the exterior

Wipe gently with a soft dry cloth. Do not apply excessive force when cleaning, gently rub the surface.

-Do not use benzene or thinner to clean the camcorder. The coating of exterior could peel off or the case could deteriorate.

79_English

维护和其他信息

维护

您的数码摄像机是具有超级设计和工艺的产品，应该小心对待。 下面的建议将帮助履行所有担保义务，并让您多年使用此产品。 ✪ 为了保护数码摄像机，要关闭数码摄像机。

-卸下电池组和交流电源适配器。
➥第 13 页

-取出存储卡。
➥第 32 页

有关储存的注意事项

•切勿将数码摄像机放在温度过高的地方很长时间：

封闭的车辆或卡车在炎热的季节会变得很热。 如果您将数 码摄像机留在此类地方，可能会出现故障或损坏外壳。 切 勿将数码摄像机直接暴露在阳光下或放在靠近热源的地方。

•切勿将数码摄像机存放在湿度很高的地方：

灰尘进入数码摄像机可能会造成故障。 如果湿度很高，镜 头会发霉，而数码摄像机可能会不起作用。

将数码摄像机存放到壁橱中时，建议您将其与干燥剂一起放 入盒子中。

•切勿将数码摄像机保存在磁性很强或强烈震动的地方。 这样可能会导致发生故障。

•从数码摄像机卸下电池组，并将其存放在阴凉的地方：

将连接的电池组存放在温度很高的地方可能会缩短其寿命。

清洁数码摄像机

✪ 在清洁之前，关闭数码摄像机，然后卸下电池组和交流电源 适配器。

•清洁外部

用柔软的干布轻轻擦拭。 清洁时请勿过度用力，轻轻擦拭 表面即可。

-切勿使用苯或稀释剂清洁摄像机。 外层会脱落或外壳会 被损坏。

中文_79