BLC/WDR
E❿ WDR...
The WDR camera is state of the art to enlarge the screen profit effectively, especially for taking photos of a window in a building. In short it revives both
the indoor and outdoor status as they are clearly.
CAMERA ID | OFF |
| (WDR) | |
IRIS | LENS |
|
| |
BLC/WDR | WDR... |
|
| |
|
| |||
COLOR/BW | COLOR | press the | ||
SHUTTER | OFF | |||
[ENTER] key | ||||
AGC | OFF | |||
|
| |||
WHITE BAL | ATW |
|
| |
❿ BLC... | E | |
If you use an ordinary camera when there is an intense and concentrated | ||
| ||
| ||
illumination behind an object, the back light will shade the image on the |
| |
monitor screen. The BLC function prevents such a back light effect to secure |
| |
a clear image under all illumination environments. Press the LEFT or RIGHT |
| |
key at OFF to set the USER function for a setting of the already set 5 areas |
| |
including BOTTOM..., TOP..., LEFT..., RIGHT..., and CENTER. If you select |
| |
the BOTTOM... in the BLC menu and press the [ENTER] key, you will be able |
| |
to certify the already set BOTTOM area. |
|
SYNC | INT | LEVEL1 |
| L - - - I - - - H | |
LEVEL2 |
| L - | - - I - - - H | ||
SPECIAL | ... | FLICKERLESS | OFF | ||
EXIT | QUIT | ||||
|
| RET |
|
|
|
❖The level of LENS IRIS can be set at the time of WDR function setup.
■LEVEL 1 : Controls the shutter speed while WDR operate.
■LEVEL 2 : Controls the whole brightness while WDR operate.
■FLICKERLESS: This is for preventing flicker on the screen when PAL
system is used in 60HZ power supply region. That is to prevent shaking on the screen resulted from the discordance of the vertical sync frequency and the flicker frequency of the illumination. While this menu is ON, the electronic shutter is fixed to 1/120sec(PAL).
24
CAMERA ID | ON... |
IRIS | ELC... |
BLC/WDR | BLC... |
COLOR/BW | COLOR |
SHUTTER | OFF |
AGC | OFF |
WHITE BAL | ATW |
SYNC | INT |
SPECIAL | ... |
EXIT | QUIT |
press the [ENTER] key
(BLC)
press the [ENTER] key
AREA | BOTTOM ... |
RET |
|
25