Samsung SNC-C7478P manual Camera Setup, White Balance Setup, Auto Exposure Setup

How to use OSD Menu

CAMERA SETUP

Setup the general functions of zoom camera module

ZOOM CAMERA SETUP

FOCUS MODE	SEMIAUTO
DIGITAL ZOOM	ON
IMAGE FLIP	OFF
FLICKERLESS	OFF

<WHITE BALANCE		SETUP>
<AUTO EXPOSURE		SETUP>
BACK
EXIT
• Focus Mode	[AUTO/MANUAL/SEMIAUTO]

Sets camera focus mode.

SEMIAUTO Mode

This mode exchanges focus mode automatically between Manual Focus mode and Auto Focus mode. Manual Focus mode activates in preset operation and Auto Focus mode activates when jog operation starts.

With Manual mode at presets, Focus data is memorized in each preset in advance and camera calls focus data in correspondence with presets as soon as camera arrives at a preset.

• Digital Zoom [ON/OFF]

Sets digital zoom function to ON/OFF. If this is set to OFF, optical zoom function runs but zoom function stops at the end of optical zoom magnification.

• Image Flip [ON/OFF]

To display Upside down image.

• Flickerless [ON/OFF]

Turn on or off the Flickerless function. In this function, AE mode becomes Shutter Priority mode and shutter speed value will be fixed to 1/100 sec.

❖White Balance Setup

WB SETUP - GLOBAL

WB MODE	AUTO
- RED ADJUST	---
- BLUE ADJUST	---

BACK

EXIT

• WB Mode [AUTO/MANUAL]

In Manual mode, Red and Blue level can be set up manually

•	Red Adjust	[0~255]
•	Blue Adjust	[0~255]

❖Auto Exposure Setup

AE SETUP
WDR/BLC	ALL OFF
DAY/NIGHT	AUTO
AE MODE	AUTO

IRIS LEVEL ---

GAIN LEVEL ---

SHUTTER SPD ---

BRIGHTNESS ---

BACK

EXIT

• WDR/BLC [ ALL OFF / WDR ON / BLC ON ]

Select WDR(Wide Dynamic Range) or BLC(Backlight Compensation) function. All OFF means turning off both functions.

• Day/Night	[AUTO/DAY/NIGHT]
AUTO exchanges Day / Night
• AE MODE	[AUTO / MANUAL / IRIS / SHUTTER
	/ BRIGHT]

AUTO: Full Auto mode for AE function

MANUAL: In manual mode. IRIS, GAIN, SHUTTER SPEED can be changed in this mode.

IRIS: Iris priority mode. You can change IRIS while others are adjusted automatically.

SHUTTER: Shutter priority mode. Shutter speed can be changed while others are adjusted automatically.

BRIGHTNESS: In this mode, you can assign AE value in terms of Brightness.

28 – 36x IP Smart Dome Camera