Samsung SNC-C7478P manual Installation Using pole, Mount Bracket, RS-485 Termination Resistor

Installation

❖RS-485 Termination Resistor

ON ON

1 2 3 4 5 6 7 8

•Pin 8 is used for ON/OFF of RS-485 Termination. Normally, it must be OFF state. Especially when you have trouble with long Daisy chain style connection, turn ON this termination switch of last camera.

– Pin 8 RS-485 Termination Resistor (On/Off)

INSTALLATION USING pole

MOUNT BRACKET

1.Press the PTZ mechanism's A, B handles and pull out for Main Cable connection.

A B

2.Wrap the pipe thread of the housing top by Water proof tape.[1]

After hooking the safety cable on the hole of pipe [2], attach the upper housing to mount bracket by turning it at least seven turns [3]. To fix the upper body orientation, turn the handle of double nuts to clockwise tightly [4].

2

1 4

3

3.Care must be taken dome cover is hung by internal safety cable properly. Plug fan/heater cables into the connectors in the housing.



12 – 36x IP Smart Dome Camera