Samsung SNC-C7478P manual Function Setup, Parking Action Setup, Home/Preset/Pattern/Autopan/Scan

How to use OSD Menu

❖Parking Action Setup

PARKING ACTION SETUP

PARK ENABLE	OFF
WAIT TIME	00:10:00
PARK ACTION	HOME

BACK

EXIT

If Park Enable is set to ON, camera runs assigned function automatically if there is no PTZ command during assigned “Wait Time”.

•	Park Enable	[ON/OFF]
•	Wait Time	[5 sec ~ 4 hour]

The time is displayed with “hh:mm:ss” format and you can change this by 1 sec unit.

•Park Action

[HOME/PRESET/PATTERN/AUTOPAN/SCAN]

Ex) If HOME is selected for Park Action, camera will move to home position when there is no PTZ command during assigned “Wait Time.”

Function Setup

FUNCTION SETUP

<PRESET SETUP> <AUTO PAN SETUP> <PATTERN SETUP> <SCAN SETUP> <SCHEDULE SETUP>

BACK

EXIT

Configure 5 Special Functions with this menu

•Preset Setup

127 Presets from the number 1 to 128 can be assigned excluding preset 95 reserved for Menu.

•Auto Pan Setup

Up to 8 Auto Pans are available, which makes camera to move slowly between two preset points.

•Pattern Setup

Up to 4 patterns can be stored in the dome.

In this function, path data created by manual move

of Joystick are recorded and you can playback the identical path automatically whenever required.

•Scan Setup

Up to 8 Scans can be defined.

In a Scan, max 20 entities are assigned from any combinations of Preset/Auto Pan/Pattern. If you run a Scan, camera will execute each entry sequentially.

•Schedule Setup

7 rules of Schedule can be assigned by day and time. Appropriate actions (such as Home, Preset, Auto Pan, Pattern and Scan) can be defined for each rule. Also, it is possible to use Weekday and Weekend in a rule to make it simple.

22 – 36x IP Smart Dome Camera