Samsung SNC-C7478P manual Transfer Setup, Ftp, Smtp

Setup Tool

TRANSFER SETUP

You can set an FTP/E-mail(SMTP) server to send the prior/posterior alarm image saved in the camera when an alarm is generated.

FTP

You can transfer an alarm image to an FTP server. When the initial FTP server setting and connection are not verified, the <No verified> messenger appears.

❖Use Passive Mode

•Select this option when the passive mode connection is necessary due to firewall or FTP server setting.

❖FTP Server Address

•Enter the IP address of an FTP server to which an alarm image will be sent.

❖Upload Path

•You can set the path of the FTP account to transfer an alarm image. You can set a path by just typing </directory name> or <directory name> in this field. If you do not specify a path, alarm files are sent to the root directory of the FTP account.

❖Port

•Although FTP server port is 21 as a default, you can change the port number according to the FTP server settings.

❖User ID

•Enter a user account ID to connect to login the FTP server.

❖Password

•Enter a user account password to login the FTP server.

❖Test

•To test FTP transmission, Click [Test] button. Connect to the configured FTP server and conduct image transmission test automatically.

When the FTP server connection and transmission tests are complete, the <Verified> message will be displayed.

If the test fails, an error message appears. In this case, check the FTP server status and the configured settings once again.

SMTP

You can transfer an alarm image through Email. This function supports SMTP Email server only. When the initial SMTP server setting and connection are not verified, the <Not verified> message appears.

❖Use SSL/TLS

•Choose whether SSL/TLS secure e-mail will be used. To use this, corresponding SMTP Server must support SSL/TLS.

❖SMTP Server Address

•Enter the IP address of an SMTP server to be used to send an Email. Example) smtp.hotmail.com

❖Port

•Although SMTP server port is 25 as a default, you can change the port number according to the SMTP server settings.

( Default port number for SSL/TLS is 465.)

❖User ID

•Enter a user account ID to connect to connect the SMTP server.

❖Password

•Enter a user account password to the SMTP server.

❖E-Mail Sender

•Enter the address of the Email sender. If the sender address is incorrect, the Email from the sender may be classified into SPAM mail by the SMTP server and may not be sent.

❖E-Mail Receiver

•Enter the address of the Email recipient.

English – 45