Introduction
Features
❖Network Specifications
•Powerful Dual Stream by using DSP based MPEG4, MJPEG compression
•Superior Video Quality and System Stability.
•High speed : Up to 30 fps at 720x480, 25 fps at 720x576.
•Web Browser based viewer support.
•Remote Pan/Tilt/Zoom control.
•Bidirectional Audio support.
•Support with DDNS Service(Samsung DDNS, Public DDNS) for Dynamic IP.
•Various protocol support. (ARP, HTTP, HTTPS, DHCP, TCP/IP, UDP, RTP/RTSP, SMTP, FTP, SNMP, etc)
•IPv4/IPv6 support.
•Alarm Function
•Motion Detection Function
❖Camera Specifications
•D Sensor :
•Zoom Magnification : × 36 Optical Zoom, × 12 Digital Zoom (Max × 432 Zoom)
•Wide Dynamic Range Function
•Day & Night Function : ICR(IR Cut filter Removal)
•Various Focus Mode : Auto Focus / Manual Focus /
•Independent or Global camera settings for each Preset locations.
❖Powerful Pan/Tilt Functions
•Max. 360°/sec high speed Pan/Tilt Motion
•Using Vector Drive Technology, Pan/Tilt motions are accomplished in the shortest path. As a result, time to target view is reduced dramatically and the video on the monitor is very natural to watch.
•Ultra low speed (0.05°/sec) enables operator to locate camera to desired target view with accuracy and ease.
•
❖Preset, Pattern, Auto Pan, Scan, Privacy Mask, Schedule and More…
•Max. 127 Presets are assignable. All of them have independent characteristics such as White Balance, Auto Exposure, Label, Alarm Input/Output and so on.
•Max. 8 set of Auto Pan can be stored. This enables to move camera repetitively between two preset positions with designated speed.
•Max. 4 of Patterns can be recorded and played back. This enables to move camera to follow any trajectory operated by joystick as closely as possible.
•Max. 8 set of Scan action can be stored. This enables to move camera repetitively with combination of Preset or Pattern or Auto Pan. A Scan is composed of max. 20 entities of Preset/ Pattern/Auto Pans.
•Max 8 Privacy Masks can be set up to protect privacy of other people.
•7 rules of Schedule can be assigned by day and time. Appropriate actions (such as Home, Preset, Scan, Pattern and Auto Pan) can be defined for each rule. Also, it is possible to use Weekday and All days to simplify the rule.
❖PTZ(Pan/Tilt/Zoom) Control
•With
•
❖OSD(On Screen Display) Menu
•OSD menu is provided to display the status of camera and to configure the functions interactively.
•The information such as Camera ID, Pan/Tilt/Zoom/ Direction, Alarm Input & Output, date/time and Preset can be displayed on screen.
•Each display item can be turned on or off independently.
❖Alarm I/O Functions
•8 alarm sensor Inputs and 4 relay output are available.
•To reject external electric noise and shock perfectly, alarm sensor Input is decoupled with photo coupler.
•If an external sensor is activated, camera can be set to move to the corresponding Preset position.
•Relay outputs can be assigned to work with a certain preset.
❖Reserved Presets for Special Purpose
•Most of camera settings are directly changed by calling Reserved Presets, not entering into OSD menu. For more information,refer to “Reserved Presets”(page 16) in this manual.
English –