Samsung SSA-S2100/EXP Reader Mode Time Schedule Reader #1 Mode Time Schedule, RD1 Mode I T/S

Page 54

advanced setup

READER MODE TIME SCHEDULE

READER #1 MODE TIME SCHEDULE

There are 2 reader modes (in READER #1) including ID Mode and ID+PW Mode. Unless otherwise set speciﬁcally, all registered users should be veriﬁed according to the reader mode in use. However you may allow entry with card only during a certain time interval for all users.

For example, suppose you want to access the door by only presenting a card from 09:00 to 17:00 and use the password veriﬁcation method for the rest of the time. You can do so by setting [READER1 MODE SETTING] to ID+P/W mode which will be general operation mode, and program a time schedule code “01” so that it can include a time period between 09:00 and 17:00 for card access. And, link the programmed Time Schedule Code 01 to READER1 MODE Time Schedule setting.

1.Press the F4 SETUP MENU button.

2. Use the buttons 4 and 6 to move to the RD1 MODE T/S item and press ENT .

3.Use the numeric buttons to enter 2-digit code and press ENT .

•T/S(Time Schedule) CODE : 00~10

•If the entry is incorrect, the “INVALID NUMBER” message will appear.

•The T/S Code “00” indicates no Time Schedule is to be applied.

4.RD1 MODE I T/S

00

4.RD1 MODE I T/S

10

READER #2 Mode Time Schedule

There are 2 reader modes (in READER #2) including ID Mode and ID+P/W Mode. Unless otherwise speciﬁed, all registered users should be authenticated to the reader mode in use. However you may allow entry with card only during a certain time interval for all users.

For example, suppose you want to access the door by only presenting a card from 09:00 to 17:00 and use the Fingerprint Veriﬁcation method for the rest of the time. And, you can do so by setting [READER2 MODE SETTING] to ID+P/W Mode which will be general operation mode, and program a T/S Code “01” so that it can include a time period between 09:00 and 17:00 for card access. And, link the programmed Time Schedule Code 01 to the READER2 MODE Time Schedule setting.

1.Press the F4 SETUP MENU button.

2. Use the buttons 4 and 6 to move to RD2 MODE T/S and press ENT .

•It can be conﬁgured in the same way as READER#1 Mode Time Schedule setting.

5.RD2 MODE I T/S

00

54_ advanced setup

Image 54

Contents Standalone Rfid Access Controller Please visit our websiteSafety information Safety informationImportant Safety Instructions Safety InformationThis device may not cause harmful interference, Contents Contents Input Type Setup Event Memory SetupVoice Volume Setup Default SettingsFeatures Product introductionDoor Open Timeout Alarm External I/O PinsForced Door Open Alarm Duress AlarmWHAT’S Included Quick Guide CD ManualAT a Glance Front PanelLCD Rear Panel Communication status indicatorPin Connector Preliminary connector for extension LEDPIN Connector Pins Signal Cable ColorCable Color Scheme TCP/IP RJ45 Connector Cable SelectionInstalling the Wall Mount Follow the instructions below to install the wall mountConnecting the Termination Resistor and Diode Bypass Diode ConnectionEARTH-GROUNDING the Communication Cables Host PCConnection Input ConnectionOutput Connection External Reader Connection External Reader ConnectionCommunication Line Connection RS-232 Communication Port ConnectionMax m RS-485 Communication Port Connection StandaloneRS-485 Communication Port Connection Multiple Units Please follow the steps belowTCP/IP Communication Port Connection Connect all RS-485 ports of the product in parallelInitialization Initializing the system using the Initialize switchSystem Initialization in Master Mode Initializing the SystemTo Access the Master Mode Registering a Master IDTo register a master card Name Display To register a master card PIN00/00 MAX User Setup User Count SetupLanguage Setup € English € Espanol € PortugueseSET DATE/TIME DATE/TIME SetupCommunication Address Setup Comm Addr SETDefault SET Baud Rate SetupFactory Defaults Baud RateReader mode setup Reader #1 ModeReader #2 Mode Reader #2 KEY Input € USE If set, you can get access using the keypad inputReader #1 KEY Input RD#1 KEY Input not USEUser management Registering ID in Quick ModeQuick Mode Registration To register IDSCANNING… Registering the IDTo register the ID card PW TA TB C RD MA MB LV ID RegisteredSSA-S2101 Numeric letters in 4 ~ 8 or 10 digits To register the PIN numberTo select PIN PW TA TB C RD MA MB LV ID Registered User ManagementTo Delete ID Viewing the ID ListID List To cancel the work, press the button To delete all registered IDsALL ID Clear To delete all registered master IDs Duress ModeDuress Mode Not USE Duress Password Enter Duress P/W Master ID CLROpen ALR Time User Management Door Open Alarm Time SetupARM/DISARM ARM/DISARM SETTo Check the Number of Events TWO MEN Operation ModeTo move to the TWO MEN Mode item To select USE or not USE, and press ENT . J not USETo Remove ALL Events To Remove the Time ScheduleExit Button Output Time setupDoor Contact Sensor Setup Exit ButtonTime Setup Auxiliary Input #1 SetupAuxiliary Input #2 Setup AUX INPUT#1Tamper Alarm Tamper Alarm Output SetupCUT OFF Output Setup CUT OFF AlarmDuress Mode Output Setup ARM/DISARM Output SetupDoor Open Timeout Setup Output Setup for Level IDs Accessing Reader #1Output Setup for Level 2 IDs Accessing Reader #1 Output Setup for Level 3 IDs Accessing Reader #1Output Setup for Level 4 IDs Accessing Reader #1 Reader #1 Time Schedule Error Output Setup Reader #1 Error Output SetupReader #1 ID Error Output Setup Reader #1 Antipassback Error Output SetupOutput Setup for Level IDS Accessing Reader #2 RD2 ID OK LV2Reader #2 ID Error Output Setup Reader #2 Error Output SetupOutput Setup for Level 4 IDs Accessing Reader #2 12.RD2 ID Error13.RD2 T/S Error Time Setup Reader #2 Time Schedule Error Output SetupReader #2 Antipassback Error Output Setup 14.RD2 APB ErrorOutput Time SCHEDULE+ID Advanced setupTime Unit Setup Time Unit Unit 1SEC Unit 0.1SECAPB Mode Not USE ALL Clear Antipassback ModeTime Schedule Setup Use the 4 Buttons to specify the interval, dayHoliday Setup Code 01 Holiday Code SetupHoliday Code Code 10RD1 Mode I T/S Reader Mode Time Schedule Reader #1 Mode Time ScheduleReader #2 Mode Time Schedule RD2 Mode I T/SVoice I T/S Output Time Schedule SetupVoice Message Time Schedule T/S Code ‘00’ means no Time Schedules are to be appliedInput Time Schedule Setup Input CUT OFF Check SetupCUT OFF SET Additional features Event Memory SetupID Display Voice Volume Wiegand Output SetupVoice Volume Setup Wiegand Output not USE Not USEONE Time Read  The default setting for One Time Read is not USEONE Time Read Not USE Jnot USE Additional Features Version CheckInput Test Output TestKeypad Test Last UpdateLCD Test Press ANY KEYMemory Test RAM TESTING…Reader Test Reader Test SCANNING…Communication Test Comm TestInput Type Setup Input TypeO , 0 1 N C E X D C I 1 I 2 T P 0 0 0 0 0 0 0 0 0 Other information Menu StructureMenu Structure of the F4 button Menu Structure of the F3 buttonF3 button F4 buttonMenu Structure of the F5 button F5 buttonOther Information Menu Structure of the F6 button F6 buttonMenu Structure of the F7 button Menu Structure of the F8 buttonMenu Structure of the F12 button Menu Structure of the F9 buttonF9 button F12 buttonDuress Alarm Default SettingsOutput Settings for Input Sources TTL#1 TTL#2Output Setting for Authentication Troubleshooting TroubleshootingTrouble Shooting Communication between CardBuzzer keeps beeping Controller and the Host PC failsProduct Specifications Product speciﬁcationsCorrect disposal of batteries in this product