DEFAULT SETTINGS
Output Settings for Input Sources
|
| Output | Door Relay | Alarm Relay | TTL#1 | TTL#2 | Buzzer |
Input | (DR) | (AR) | (T1) | (T2) | (BZ) | ||
[1] | Exit Button | 03 | 00 | 00 | 00 | 00 | |
[2] | Door Contact | 00 | 99 | 00 | 00 | 00 | |
|
|
|
|
|
|
| |
[3] | AUX Input #1 | 00 | 00 | 00 | 00 | 00 | |
[4] | AUX Input #2 | 00 | 00 | 00 | 00 | 00 | |
|
|
|
|
|
| ||
[5] TAMPER Alarm | 00 | 99 | 99 | 99 | 99 | ||
[6] | Cut Off Alarm | 00 | 00 | 00 | 00 | 00 | |
|
|
|
|
|
| ||
[7] DURESS ALARM | 00 | 00 | 00 | 00 | 00 | ||
[8] ARM/DISARM OUT | 00 | 00 | 00 | 00 | 00 | ||
|
|
|
|
|
|
| |
[9] | Door Open Timeout | 00 | 99 | 00 | 00 | 00 | |
[10] | Output Time Schedule | 00 | 00 | 00 | 00 | 00 | |
|
|
|
|
|
|
| |
[11] | Input Time Schedule | 00 | 00 | 00 | 00 | 00 | |
|
|
|
|
|
|
| |
[12] | Cut Off Check | 00 | 00 | 00 | 00 | 00 | |
|
|
|
|
|
|
| |
[13] | Input Type | 00 | 00 | 00 | 00 | 00 | |
|
|
|
|
|
|
|
|
1) Index No. [1] ~ [9]
The values indicate the operating time of each output for the input signal. 2) Index No. [10]
The values indicate the time schedule code (index) applied to each output.
3)Index No. [11]
The values indicate the input port ([1]Exit Button ~ [5]Tamper S/W).
Each value indicates the code of Time Schedule to be applied to the corresponding input port.
4)Index No. [12]
The values indicate whether or not to use the cut off check feature for each input. (0 – Not Use, 1 – Use)
5)Index No. [13]
The values indicate whether the input type is NO(Normally Open) or NC(Normally Closed). (0 – NO, 1 – NC)
OTHER INFORMATION
English _ 71