ENGLISH
Whilst heating, one press on ( 
) Button stops the oven. You can restart it by pressing the ( 
) Button or a second press on ( 
) Button will cancel the selected program. When it is NOT in a heating cycle, one tap on ( 
) Button cancels the selected program. You can set the power level first and then the cooking time next, or vice versa. You can press +20sec button one or more times in order to add the cooking time by 20 seconds.
When heating cycle is completed and you open the door, the oven lamp automatically turns on and goes off 1 min later.
When you open the door whilst in a heating cycle, the oven stops operating and the oven lamp automatically turns on for 5 min and goes off 5 min later. If you leave the oven door open for more than 5 min, the oven beeps once every minute and after 5 min the power source check indicator ‘ON’ appears in the display window.
When in a heating cycle, you can not change the power level or heating time. But you can add 20 sec increments using the +20sec Button. The dial may be rotated but this does not affect the current operation and the display remains the same. It becomes effective next time you set the oven manually after you finish the current heating. If
you want to change the current setting, firstly stop the heating by using CANCEL Button and set desired power level and cooking time again. But when you are NOT in a heating cycle, you can change the power level and heating time. Changed values are promptly shown in the display.
The oven is designed not to work when power level is set to “0” mode between the heating mode and the defrosting mode.
When you first plug in the power cord, the oven beeps once and all the indicators show for 5 sec in the display window.
POWER LEVELS AND TIME VARIATIONS
The power level function enables you to adapt the amount of energy dissipated and thus the time required to cook or reheat your food, according to its type and quantity. You can choose between the power levels below.
Power level |
| CM1919/CM1919* | CM1519/CM1519* | CM1619/CM1319* | |||||
| Percentage | Output | Percentage | Output | Percentage | Output | |||
|
|
| |||||||
HIGH ( | ) |
| 100 % | 1850 W | 100 % | 1500 W | 100 % | 1300 W | |
MEDIUM ( | ) | 70 % | 1295 W | 70 % | 1050 W | 70 % | 910 W | ||
LOW ( | ) |
| 50 % | 925 W | 50 % | 750 W | 50 % | 650 W | |
HIGH |
|
| 20 % | 370 W | 25 % | 375 W | 30 % | 390 W | |
DEFROST ( | ) | ||||||||
|
|
|
|
|
| ||||
LOW |
|
| 10 % | 185 W | 13 % | 195 W | 15 % | 195 W | |
DEFROST ( | ) | ||||||||
|
|
|
|
|
| ||||
The cooking times given in recipes and in this booklet correspond to the specific power level indicated.
Power level |
| Max. Time | |
HIGH ( | ) |
| 25 mins |
MEDIUM ( | ) |
| 40 mins |
LOW ( ) |
| 40 mins | |
HIGH DEFROST ( | ) | 50 mins | |
LOW DEFROST ( | ) | 50 mins | |
The maximum time available per power level is shown in the table above.
A defrosting time can be set up to 50 min. But the time is reduced to 25 min (for HIGH) or 40 min (for MEDIUM or LOW) the moment you change the current power level (DEFROST) to other level such as HIGH, MEDIUM or LOW.
Example : If you set a defrosting time to 45min with the heating mode at DEFROST and if you change the power level to HIGH, the time will be automatically reduced to 25min.
You can set the power level first and the cooking time next, and vice versa.
8
11/5/2015 9:05:40 AM 