5.When the right time is displayed, press the START button to start the clock. The clock starts itself within 10 seconds.
Result : The time is displayed whenever you are not using the microwave oven.
If you don’t want to setting the time, press the CANCEL button before starting your cooking.
If you want to change or reset the time setting, plug your oven again.
COOKING INSTRUCTIONS
The IEC Power Output rating is an internationally standardised rating, so all microwave manufacturers now use the same method of measuring power output.
If food packaging gives cooking instructions based on IEC Power ratings, set cooking times according to the IEC Power of your oven.
For example :
If the cooking instructions are based on a 650W oven, then you will need to reduce
some cooking time for the MW87L (850W) Ready meals are now very convenient and popular. These are meals which are already prepared and cooked by the food manufacturer, and then frozen, chilled or vacuum sealed for long life. Increasingly, heating times for such ready meals are being based on the Heating Categories A, B, C, D and E.
On this instance, simply match the heating category of your oven to the instructions on the food package, and set your timer accordingly.
For example : If the heating instructions are 3 minutes on HIGH for a D category oven, then you will need to set your timer for less than 3 minutes on HIGH for the CM1919/CM1919* (E category).
Always remember that cooking instructions are intended only as a guide. If you have followed the instructions and the food is still not piping hot throughout, simply return it to the oven and cook it until it is.
COOKING/REHEATING
Make sure the oven is plugged into a properly earthed electrical outlet and “ON” appears in the display window.
Open the door(The oven lamp will be turned on.).
Put the food into a suitable container, place it in the centre of the oven and then close the door securely (The oven lamp will go off.).
1. Select the desired power level by rotating the
COOKING POWER CONTROL DIAL.
Result : The selected power level will be displayed in the display window.
2.Set the desired heating time by rotating the TIMER
DIAL.
Result : “ON” blinks and the selected time is displayed in the display window.
3.Press the 
button.
Result : The oven lamp and cooling fan will be turned on. Heating will start. The time on digital display will count down.
When all time is elapsed, the end of cycle Beep Tone will sound 4 times and all heating will stop. The oven lamp will go off. For 1 min, the cooling fan will keep working in order to cool down the interior parts.
During the time, the fan will not stop even when you open the door. 1 min later it will stop and “ON” appears again. Food may be removed from oven whilst the fan is still running.
4.Open the door and take the food out. Close the door. The oven lamp will go off.
ENGLISH
7
11/5/2015 9:05:39 AM 