Samsung VCR8930L3R/XET manual Using the Vacuum Cleaning Robot, Starting/Stopping Cleaning

USING THE VACUUM CLEANING ROBOT

Starting/Stopping Cleaning

You can run or stop all vacuum cleaning robot functions.

■ Each vacuum cleaning robot function only runs when the Power Switch is turned on.

■ When the vacuum cleaning robot is operating, press the () button to cancel the operation and select a function.

Turning the power on or off

Turning the power on

- Main unit: Press the () button.

Turning the power off

-Remote control: Press the [Power] button.

- Main unit: Press and hold the () button down for 3 seconds.

❈ If no key is pressed for approximately 1 minute after turning the power on, the power is automatically cut to prevent the battery discharging. To turn the power on again, press and hold the power (Start/Stop) button on the main body.

Using the remote

control

Starting or stopping cleaning

Starting

-Remote control : Press the Auto, Spot, Max, Manual button.

-Main unit : Select Auto, Spot, Max mode by using the () button and then pressing the () button.

-When cleaning begins, the vacuum cleaning robot starts to move.

❈Pressing the () button without selecting cleaning mode starts

to perform the Auto mode cleaning.

Stopping

-To stop, press the () remote control or main unit button.

-When cleaning is stopped, the vacuum cleaning robot stops.

Using the main unit

buttons

26_ operating