SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “:0”, “88:88” or “12:00” is automatically displayed on the display.
Please set the current time. The time can be displayed in either the 24- hour or
• When you first install your microwave oven
• After a power failure
Do not forget to reset the clock when you switch to and from summer and winter time.
Auto energy saving function
If you do not select any function when appliance is in the middle of setting or operating with temporary stop condition, function is canceled and clock will be displayed after 25 minutes.
Oven Lamp will be turned off after 5 minutes with door open condition.
1.Press the Clock button.
2. Turn the Multi Function Selector Dial to set time
display type. (12 H or 24 H)
3. Press the Multi Function Selector Dial to
complete the setup.
4. Turn the Multi Function Selector Dial to set the hour.
5. Press the Multi Function Selector Dial.
6. Turn the Multi Function Selector Dial to set the minute.
7. When the right time is displayed, press the Multi Function Selector Dial to start the clock.
Result:
HOW A MICROWAVE OVEN WORKS
Microwaves are
You can use your microwave oven to:
•Defrost
•Reheat
•Cook
Cooking principle.
1.The microwaves generated by the magnetron reflected at cavity and are distributed uniformly as the food rotates on the turntable. The food is thus cooked evenly.
2. The microwaves are absorbed by the food up to a depth of about 1 inch (2.5 cm). Cooking then continues as the heat is dissipated within the food.
3.Cooking times vary according to the container used and the properties of the food:
•Quantity and density
•Water content
•Initial temperature (refrigerated or not)
As the centre of the food is cooked by heat dissipation, cooking continues even when you have taken the food out of the oven. Standing times specified in recipes and in this booklet must therefore be respected to ensure:
•Even cooking of the food right to the centre
•The same temperature throughout the food
15
ENGLISH
3:55:49