ENGLISH
CHECKING THAT YOUR OVEN IS OPERATING CORRECTLY
The following simple procedure enables you to check that your oven is working correctly at all times. If you are in doubt, refer to the section entitled “What to do if you are in doubt or have a problem” on the page
The oven must be plugged into an appropriate wall socket. The turntable must be in position in the oven. If a power level other than the maximum (100 % - 900 W) is used, the water takes longer to boil.
Open the oven door by pulling the handle on the right side of the door. Place a glass of water on the turntable. Close the door.
Press the Start/ + 30s button and set the time to 4 or 5 minutes, by pressing the Start/ + 30s button the appropriate number of times.
Result: The oven heats the water for 4 or 5 minutes.
The water should then be boiling.
POWER LEVELS AND TIME VARIATIONS
The power level function enables you to adapt the amount of energy dissipated and thus the time required to cook or reheat your food, according to its type and quantity. You can choose between six power levels.
Power level | Percentage | Output |
|
|
|
HIGH | 100 % | 900 W |
MEDIUM HIGH | 67 % | 600 W |
MEDIUM | 50 % | 450 W |
MEDIUM LOW | 33 % | 300 W |
DEFROST | 20 % | 180 W |
LOW | 11 % | 100 W |
The cooking times given in recipes and in this booklet correspond to the specific power level indicated.
If you select a... | Then the cooking time must be... |
Higher power level | Decreased |
Lower power level | Increased |
COOKING/REHEATING
The following procedure explains how to cook or reheat food.
ALWAYS check your cooking settings before leaving the oven unattended.
Open the door. Place the food in the centre of the turntable. Close the door. Never switch the microwave oven on when it is empty.
1. Turn Mode Selector Dial to Microwave mode position.
Result: The following indications are displayed: 
(microwave mode)
2. Turn Multi Function Selector Dial to desired until the appropriate power level is displayed. At that time, press the Multi Function Selector Dial to set the power level.
3. Set the cooking time by turning the Multi Function Selector Dial.
Result: The cooking time is displayed.
4. Press the Start/ + 30s button.
Result: The oven light comes on and the
turntable starts rotating. Cooking starts and when it has finished:
• The oven beep and flash “0” four times.
The oven will then beep one time per minute.
If you would like to know the current Power Level of the oven cavity, press Multi Function Selector Dial once. If you would like to change the power level during cooking, turn the Multi Function Selector Dial.
Quick Start:
If you wish to heat a dish for a short period of time at maximum power (900 W), you can also simply press the Start/ + 30s button once for each 30 seconds of cooking time. The oven starts immediately.
16
3:55:49