FUNCTIONS
+Bluetooth POWER on (Bluetooth
POWER)
When the Bluetooth Power On function is on and the SoundStand is turned off, if a previously paired Bluetooth device tries to pair with the SoundStand, the SoundStand turns on automatically.
1.Press the Bluetooth POWER button on the remote control.
2.Bluetooth POWER on appears on the SoundStand's display.
● Available only if the SoundStand is listed among the Bluetooth device’s paired devices. (The Bluetooth device and the SoundStand must have been previously paired at least once.)
●SoundStand will appear in the Bluetooth device’s searched devices list only when the SoundStand is displaying [BT READY].
●In the TV SoundConnect mode, the SoundStand cannot be paired to another Bluetooth device.
+To disconnect the Bluetooth device from the SoundStand
You can disconnect the Bluetooth device from the SoundStand. For instructions, see the Bluetooth device's user manual.
●The SoundStand will be disconnected.
●When the SoundStand is disconnected from the Bluetooth device, the SoundStand will display BT DISCONNECTED on the front display.
+To disconnect the SoundStand from the Bluetooth device
Press the SOURCE button on the remote control or the ( 
) button on the product's top panel to switch from BT to another mode or turn off the SoundStand.
●The connected Bluetooth device will wait a certain amount of time for a response from the SoundStand before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
● In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the SoundStand and the Bluetooth device exceeds 5m.
●The SoundStand automatically turns off after 25 minutes in the Ready state.
More About Bluetooth
Bluetooth is a technology that enables Bluetooth- compliant devices to interconnect easily with each other using a short wireless connection.
●A Bluetooth device may cause noise or malfunction, depending on usage, when:
-A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the SoundStand.
-It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.
-It is exposed to electrical interference from same
●Pair the SoundStand with the Bluetooth device while they are close together.
●The further the distance between the SoundStand and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost.
●In poor
●The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut off if the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as walls or doors.
●This wireless device may cause electric interference during its operation.
16