Samsung AQ24UGAN, AQ09UGDN Changing Direction of the Drain Hose,  Direction of the drained water

Page 16

INSTALLING THE AIR CONDTIONER

Changing Direction of the Drain Hose

Screw hole

Screw

Drain hose

Drain pan outlet

Rubber cap

<Pour the water in direction of arrow>

Change the direction only when it is necessary.

1Detach the rubber cap with the flyer.

2Detach the drain hose by pulling it and turning to the left.

3Insert the drain hose by fixing it with the screw into the groove of the drain hose and the outlet of the drain pan.

4Attach the rubber cap with a screwdriver by turning it to the right until it fixes to the end of the groove.

5Check for leakage on both side of the drain outlet.

CAUTION Make sure the indoor unit is in upright position when you pour water to check for leakage. Make sure that the water does not overflow onto the electrical part.

Direction of the drained water

E-16

Vivaldi_IM_30271A_E_11.07.09.indd 16

2009-11-7 13:57:07

Image 16
Contents Vivaldi IM30271AE11.07.09.indd 2009-11-7 Contents Safety Precautions EnglishMinor personal injury or property Choosing the Installation Location Model Figure Description Top view Side viewWhen installing more than 1 outdoor unit Accessories Accessories in the Indoor Unit CaseAccessories in the Outdoor Unit Case Following accessories are supplied with the air conditionerFixing the Installation Plate Direction of pipeConnecting the Assembly Cable Model Power cable Interconnection Type GLIndoor unit Outdoor unitOuter Diameter Torque kgfcm DO not Wall UP the Pipe ConnectionPurging the Indoor Unit Cutting or Extending the Pipe Depth a Flaring Size BInstalling and Connecting the Drain Hose of the Indoor Unit Drain hose installationChanging Direction of the Drain Hose Change the direction only when it is necessary Direction of the drained water Installing and Connecting the Drain Hose of the Outdoor Unit Purging the Connected Pipes With a Global Warming Potential GWP =You should purge the air in the indoor unit and in the pipe Reduction of cooling capacity and malfunctionAdd refrigerant charge according to table below  If you use a pipe ThenGWP value 1975Performing the Gas Leak Tests To check for gas leaks onLeak Test with Nitrogen before opening valves Leak Test with R410A after opening valvesFixing the Indoor Unit in Place Fixing the Outdoor Unit in PlaceFinal Check and Trial Operation Providing Information for User Pump Down Procedure When removing the productStorage in a handy and safe place Vivaldi IM30271AE11.07.09.indd 2009-11-7 Installation Manual Cooling and Heating
Related manuals
Manual 31 pages 36.44 Kb Manual 32 pages 17.61 Kb Manual 32 pages 60.27 Kb Manual 30 pages 51.71 Kb Manual 32 pages 35.17 Kb Manual 32 pages 6.86 Kb Manual 34 pages 7.54 Kb Manual 32 pages 51.3 Kb Manual 33 pages 37.87 Kb Manual 31 pages 55.87 Kb Manual 31 pages 51.06 Kb