Samsung AQ09UGDN, AQ24UGAN manual Installing and Connecting the Drain Hose of the Outdoor Unit

Page 17

INSTALLING THE AIR CONDTIONER

Installing and Connecting the Drain Hose of the Outdoor Unit

ENGLISH

While heating, ice may accumulate. During the process of defrosting, check if condensation draining is adequate. For adequate draining, do the following:

1Insert the drain plug into the drain hole on the underside of the outdoor unit.

CAUTION To avoid drain plug from contacting the ground, secure gap between the ground and the bottom surface of the outdoor unit.

Drain hole

Drain plug

2Connect a drain hose to the drain plug.

3Ensure that condensation draining is adequate.

Bottom surface of outdoor unit

Drain

 

hole

 

Drain plug

Drain hose

CAUTION

In areas with heavy snow fall, piled snow could block the air intake.

To avoid this incident, install a frame that is higher than estimated snow fall. In addition, install a snow-proof hood to avoid snow from piling on the outdoor unit.

Snow-proof hood

Estimated

 

snow fall

Frame

 

Ground

E-17

Vivaldi_IM_30271A_E_11.07.09.indd 17

2009-11-7 13:57:11

Image 17 Contents
Vivaldi IM30271AE11.07.09.indd 2009-11-7 Contents English Safety PrecautionsMinor personal injury or property Model Choosing the Installation LocationTop view Side view  Figure DescriptionWhen installing more than 1 outdoor unit Accessories in the Indoor Unit Case AccessoriesAccessories in the Outdoor Unit Case Following accessories are supplied with the air conditionerDirection of pipe Fixing the Installation PlateModel Power cable Interconnection Type GL Connecting the Assembly CableOutdoor unit Indoor unitDO not Wall UP the Pipe Connection Outer Diameter Torque kgfcmPurging the Indoor Unit Depth a Flaring Size B Cutting or Extending the PipeDrain hose installation Installing and Connecting the Drain Hose of the Indoor Unit Direction of the drained water Change the direction only when it is necessaryChanging Direction of the Drain Hose Installing and Connecting the Drain Hose of the Outdoor Unit With a Global Warming Potential GWP = Purging the Connected PipesYou should purge the air in the indoor unit and in the pipe Reduction of cooling capacity and malfunction If you use a pipe Then Add refrigerant charge according to table belowGWP value 1975To check for gas leaks on Performing the Gas Leak TestsLeak Test with Nitrogen before opening valves Leak Test with R410A after opening valvesFixing the Outdoor Unit in Place Fixing the Indoor Unit in PlaceFinal Check and Trial Operation Storage in a handy and safe place Pump Down Procedure When removing the productProviding Information for User Vivaldi IM30271AE11.07.09.indd 2009-11-7 Cooling and Heating Installation Manual
Related manuals
Manual 31 pages 36.44 Kb Manual 32 pages 17.61 Kb Manual 32 pages 60.27 Kb Manual 30 pages 51.71 Kb Manual 32 pages 35.17 Kb Manual 32 pages 6.86 Kb Manual 34 pages 7.54 Kb Manual 32 pages 51.3 Kb Manual 25 pages 27.08 Kb Manual 33 pages 17.1 Mb Manual 31 pages 55.87 Kb Manual 31 pages 51.06 Kb